diff --git a/Dockerfile b/Dockerfile index adbb5a0..e283c1c 100644 --- a/Dockerfile +++ b/Dockerfile @@ -3,13 +3,14 @@ ############## # Password is password for staff@freeridepgh.org & volunteer@freeridepgh.org -FROM bikebike/bikebike +FROM bikebike/bikebike:16.04 MAINTAINER Jonathan Rosenbaum RUN git clone https://github.com/FreeRidePGH/BikeBinder.git RUN gem install bundler -RUN apt-get update && apt-get -y install g++ libfcgi-dev libsqlite3-dev +RUN apt-get update && apt-get -y install g++ libfcgi-dev libsqlite3-dev ruby-sqlite3 RUN bundle install --gemfile=/BikeBinder/Gemfile +COPY devise.rb /BikeBinder/config/initializers/ RUN cd /BikeBinder; bundle exec rake setup; bundle exec rake populate # setup to use sqlite3 @@ -18,3 +19,5 @@ COPY bikebinder.conf /etc/supervisor/conf.d/ CMD ["supervisord", "-c", "/etc/supervisor/supervisord.conf"] +# http://stackoverflow.com/questions/32799856/rails-webrick-server-default-ip-and-port +# docker run -d -p 3000:3000 --name="bikebinder" bikebike/bikebinder diff --git a/bikebinder.conf b/bikebinder.conf index 1edb153..5017ae3 100644 --- a/bikebinder.conf +++ b/bikebinder.conf @@ -1,4 +1,4 @@ [program:bikebinder] directory=/BikeBinder -command=rails server +command=rails server -b 0.0.0.0 -p 3000 autorestart=true diff --git a/devise.rb b/devise.rb new file mode 100644 index 0000000..a6d3046 --- /dev/null +++ b/devise.rb @@ -0,0 +1,249 @@ +# Use this hook to configure devise mailer, warden hooks and so forth. +# Many of these configuration options can be set straight in your model. +Devise.setup do |config| + + Devise::SessionsController.layout "sessions" + + # ==> Mailer Configuration + # Configure the e-mail address which will be shown in Devise::Mailer, + # note that it will be overwritten if you use your own mailer class with default "from" parameter. + config.mailer_sender = "info@freeridepgh.org" + + # Configure the class responsible to send e-mails. + config.mailer = "Devise::Mailer" + + # Automatically apply schema changes in tableless databases + # Removed after updating to v2.1.0 + # config.apply_schema = false + + # ==> ORM configuration + # Load and configure the ORM. Supports :active_record (default) and + # :mongoid (bson_ext recommended) by default. Other ORMs may be + # available as additional gems. + require 'devise/orm/active_record' + + # ==> Configuration for any authentication mechanism + # Configure which keys are used when authenticating a user. The default is + # just :email. You can configure it to use [:username, :subdomain], so for + # authenticating a user, both parameters are required. Remember that those + # parameters are used only when authenticating and not when retrieving from + # session. If you need permissions, you should implement that in a before filter. + # You can also supply a hash where the value is a boolean determining whether + # or not authentication should be aborted when the value is not present. + # config.authentication_keys = [ :email ] + + # Configure parameters from the request object used for authentication. Each entry + # given should be a request method and it will automatically be passed to the + # find_for_authentication method and considered in your model lookup. For instance, + # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. + # The same considerations mentioned for authentication_keys also apply to request_keys. + # config.request_keys = [] + + # Configure which authentication keys should be case-insensitive. + # These keys will be downcased upon creating or modifying a user and when used + # to authenticate or find a user. Default is :email. + config.case_insensitive_keys = [ :email ] + + # Configure which authentication keys should have whitespace stripped. + # These keys will have whitespace before and after removed upon creating or + # modifying a user and when used to authenticate or find a user. Default is :email. + config.strip_whitespace_keys = [ :email ] + + # Tell if authentication through request.params is enabled. True by default. + # It can be set to an array that will enable params authentication only for the + # given strategies, for example, `config.params_authenticatable = [:database]` will + # enable it only for database (email + password) authentication. + # config.params_authenticatable = true + + # Tell if authentication through HTTP Basic Auth is enabled. False by default. + # It can be set to an array that will enable http authentication only for the + # given strategies, for example, `config.http_authenticatable = [:token]` will + # enable it only for token authentication. + # config.http_authenticatable = false + + # If http headers should be returned for AJAX requests. True by default. + # config.http_authenticatable_on_xhr = true + + # The realm used in Http Basic Authentication. "Application" by default. + # config.http_authentication_realm = "Application" + + # It will change confirmation, password recovery and other workflows + # to behave the same regardless if the e-mail provided was right or wrong. + # Does not affect registerable. + # config.paranoid = true + + # By default Devise will store the user in session. You can skip storage for + # :http_auth and :token_auth by adding those symbols to the array below. + # Notice that if you are skipping storage for all authentication paths, you + # may want to disable generating routes to Devise's sessions controller by + # passing :skip => :sessions to `devise_for` in your config/routes.rb + config.skip_session_storage = [:http_auth] + + # ==> Configuration for :database_authenticatable + # For bcrypt, this is the cost for hashing the password and defaults to 10. If + # using other encryptors, it sets how many times you want the password re-encrypted. + # + # Limiting the stretches to just one in testing will increase the performance of + # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use + # a value less than 10 in other environments. + config.stretches = Rails.env.test? ? 1 : 10 + + # Setup a pepper to generate the encrypted password. + # config.pepper = "17ef75093488fcf3837a4cc289df499d909bfd5a1bd3d6c532fdac7f103e130959cf6c04af6d54a7639624d96341708ff50270d599be61ebba15662b7b509740" + + #config.secret_key = ENV["DEVISE_SECRET_KEY"] + config.secret_key = 'b28d630bfe50c519091ede3c85070051df4bb039cf167e12555fd5fa5a0ca5bd8afe4c5cdcb2eb2f1a407b1112be64299e40a594448abe4eebb8d3ef5449d0ee' + + # ==> Configuration for :confirmable + # A period that the user is allowed to access the website even without + # confirming his account. For instance, if set to 2.days, the user will be + # able to access the website for two days without confirming his account, + # access will be blocked just in the third day. Default is 0.days, meaning + # the user cannot access the website without confirming his account. + # config.allow_unconfirmed_access_for = 2.days + + # If true, requires any email changes to be confirmed (exctly the same way as + # initial account confirmation) to be applied. Requires additional unconfirmed_email + # db field (see migrations). Until confirmed new email is stored in + # unconfirmed email column, and copied to email column on successful confirmation. + config.reconfirmable = true + + # Defines which key will be used when confirming an account + # config.confirmation_keys = [ :email ] + + # ==> Configuration for :rememberable + # The time the user will be remembered without asking for credentials again. + # config.remember_for = 2.weeks + + # If true, extends the user's remember period when remembered via cookie. + # config.extend_remember_period = false + + # If true, uses the password salt as remember token. This should be turned + # to false if you are not using database authenticatable. + # Removed after updating to v2.1.0 + # config.use_salt_as_remember_token = true + + # Options to be passed to the created cookie. For instance, you can set + # :secure => true in order to force SSL only cookies. + # config.cookie_options = {} + + # ==> Configuration for :validatable + # Range for password length. Default is 6..128. + config.password_length = 6..128 + + # Email regex used to validate email formats. It simply asserts that + # an one (and only one) @ exists in the given string. This is mainly + # to give user feedback and not to assert the e-mail validity. + config.email_regexp = /\A[^@]+@[^@]+\z/ + + # ==> Configuration for :timeoutable + # The time you want to timeout the user session without activity. After this + # time the user will be asked for credentials again. Default is 30 minutes. + # config.timeout_in = 30.minutes + + # ==> Configuration for :lockable + # Defines which strategy will be used to lock an account. + # :failed_attempts = Locks an account after a number of failed attempts to sign in. + :none # = No lock strategy. You should handle locking by yourself. + # config.lock_strategy = :failed_attempts + + # Defines which key will be used when locking and unlocking an account + config.unlock_keys = [ :email ] + + # Defines which strategy will be used to unlock an account. + # :email = Sends an unlock link to the user email + # :time = Re-enables login after a certain amount of time (see :unlock_in below) + # :both = Enables both strategies + :none #= No unlock strategy. You should handle unlocking by yourself. + # config.unlock_strategy = :both + + # Number of authentication tries before locking an account if lock_strategy + # is failed attempts. + # config.maximum_attempts = 20 + + # Time interval to unlock the account if :time is enabled as unlock_strategy. + # config.unlock_in = 1.hour + + # ==> Configuration for :recoverable + # + # Defines which key will be used when recovering the password for an account + config.reset_password_keys = [ :email ] + + # Warn on the last attempt before the account is locked. + # config.last_attempt_warning = true + + # Time interval you can reset your password with a reset password key. + # Don't put a too small interval or your users won't have the time to + # change their passwords. + config.reset_password_within = 6.hours + + # ==> Configuration for :encryptable + # Allow you to use another encryption algorithm besides bcrypt (default). You can use + # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, + # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) + # and :restful_authentication_sha1 (then you should set stretches to 10, and copy + # REST_AUTH_SITE_KEY to pepper) + # config.encryptor = :sha512 + + # ==> Scopes configuration + # Turn scoped views on. Before rendering "sessions/new", it will first check for + # "users/sessions/new". It's turned off by default because it's slower if you + # are using only default views. + # config.scoped_views = false + + # Configure the default scope given to Warden. By default it's the first + # devise role declared in your routes (usually :user). + # config.default_scope = :user + + # Configure sign_out behavior. + # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope). + # The default is true, which means any logout action will sign out all active scopes. + # config.sign_out_all_scopes = true + + # ==> Navigation configuration + # Lists the formats that should be treated as navigational. Formats like + # :html, should redirect to the sign in page when the user does not have + # access, but formats like :xml or :json, should return 401. + # + # If you have any extra navigational formats, like :iphone or :mobile, you + # should add them to the navigational formats lists. + # + # The "*/*" below is required to match Internet Explorer requests. + # config.navigational_formats = ["*/*", :html] + + # The default HTTP method used to sign out a resource. Default is :delete. + config.sign_out_via = :delete + + # ==> OmniAuth + # Add a new OmniAuth provider. Check the wiki for more information on setting + # up on your models and hooks. + # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo' + + # ==> Warden configuration + # If you want to use other strategies, that are not supported by Devise, or + # change the failure app, you can configure them inside the config.warden block. + # + # config.warden do |manager| + # manager.intercept_401 = false + # manager.default_strategies(:scope => :user).unshift :some_external_strategy + # end + + # Speed up unit tests + # https://github.com/plataformatec/devise/wiki/Speed-up-your-unit-tests + config.stretches = Rails.env.test? ? 1 : 10 + + + # Mountable engine configurations + # When using Devise inside an engine, let's call it 'MyEngine', and this engin + # is mountable, there are some extra configurations to be taken into account. + # The following options are available, assuming the engine is mounted as: + # mount MyEngine, at: '/my_engine' + # + # The router that invoked `devise_for`, in the example above, would be: + # config.router_name = :my_engine + # + # When using omniauth, Devise cannot automatically set Omniauth path, + # so you need to do it manually. For the users scope, it would be: + # config.omniauth_path_prefix = '/my_engine/users/auth' + +end