< html >
< head > < title > gBootRoot< / title > < / head >
< body text = "#000000" bgcolor = "#FFFFFF" link = "#0000EF" vlink = "#51188E"
alink="#FF0000">
< H1 align = "center" > gBootRoot< / h1 >
< H3 align = "center" > at< / h3 >
< p align = "center" > < A href = "http://sourceforge.net/projects/gbootroot" >
< IMG src = "http://sourceforge.net/sflogo.php?group_id=9513&type=1"
width="88" height="31" border="0"
alt="SourceForge Logo"> < / A > < / p >
< p > < / p >
< P align = "center" >
< b > bOOTrOOT< / b > makes the development, construction, and
testing of distributions fun and simple.< / P >
< br >
< P align = "center" >
< b > Download gBootRoot< / b > < / P >
< P align = "center" > Stable version< / P >
< p align = "center" > < A href = "http://prdownloads.sourceforge.net/gbootroot/" >
Old versions< / A > < / P >
< P align = "center" >
< IMG ALT = "" SRC = "images/gbootroot.jpg" >
< / P >
< P align = "center" >
< b > How to Use gBootRoot< / b > < / P >
< P > < IMG ALT = "" SRC = "images/gBS.jpg" align = "right" > The most important button to
familiarize yourself with is the Submit button which starts the whole process;
dialogs are presented as the process continues asking you if you want to
continue " OK" or stop " Cancel" .< / P >
< p >
The < u > first row< / u > presently has only one Boot Method choice:
"2 disk compression." & nbsp
Clicking on the menu on the right selects the Boot Method.< / p >
< P > The < u > second row< / u > allows you to select the kernel for the Boot/Root set. You
may either use the file selector button on the right hand side, or you may
type in the location on the left hand side.< / P >
< P >
The < u > third row< / u > allows you to select the compressed filesystem you are
providing, using either of the two ways mentioned before. You may use a
pre-made root filesystem or you may create one using one of the Methods
provided in the Advanced Root Section.
< / P >
< P > The < u > fourth row< / u > allows you to select the device you want to use. The default
device is the first floppy disk - /dev/fd0.< / P >
< p >
The < u > fifth row< / u > allows you to choose the size of the device being used.
The default size of 1440 assumes you are using a floppy drive (Note: You may
want to experiment with 1722 which works fine with many floppy drives.), but
can be used with other sized devices like tape drives. Click on the
appropriate radio button to choose either gzip or bzip2 compression if the
program doesn't automatically detect it.< / p >
< P align = "center" > < b > Verbosity Box< / b > < / p >
< IMG ALT = "" SRC = "images/verbosity_box.jpg" align = "right" >
The < u > slider bar< / u > on the right allows the output of the verbosity box
to be
changed from the highest (2) to the lowest setting (1) or to be turned off (0)
or on again.
At times it may be advantageous to turn off the verbosity box
since large quantities of output to this box may cause gbootroot to use too
much cpu power; however, output may still be found in the text file "verbose"
in /tmp/gbootroot_tmp'time-date'.< / p >
< br > < br > < br > < br > < br > < br > < br > < br >
< p > < P align = "center" > < b >
Using the Advanced Boot Section< / b > < / p >
< p > < IMG ALT = "" SRC = "images/ABS.jpg" align = "right" >
"Stripping" On by default for libraries and binaries. The stripping
behavior for libraries may be changed by clicking on the right mouse button
to change from --strip-debug to --strip-all.< / p >
< p >
"Devel Device" If the device used for development is different than the
actual boot device, use this field to indicate that device. You will have to
run lilo -v -C brlilo.conf -r "device mount point" manually at a later time
on the actual boot device.< / p >
< p >
"Opt. Device" Add devices to the boot disk which are necessary for the
kernel to function properly.
Put a space between each device.
For instance, /dev/fb0 for frame buffer devices.< / p >
< p >
"Kernel Module" Add the modules found in
/lib/modules/kernel-version which are necessary for the Boot Method to work
properly.
If these modules aren't found here it is assumed that they either
are in the kernel or they do not exist.< / p >
< p >
"append =" Add append options to brlilo.conf. If you are using a frame
buffer device you could add something like video=matrox:vesa:402,depth:16.< / p >
< br > < br > < br > < br > < br > < br > < br > < br > < br >
< P align = "center" >
< b > Using the Advanced Root Section< / b > < / P >
< p > < IMG ALT = "" SRC = "images/ARS.jpg" align = "right" >
"Root Device"
This is the device used for the root filesystem when
constructing the Boot/Root set.
You may choose a device which is different
than the Boot device, but presently only floppy devices are supported.< / p >
< p >
"Root Device Size" The size of the actual media used for the Root Device.< / p >
< p >
"Root Filename"
The name give to the root filesystem when initially made
in the temporary creation location.
The save button allows the creation to
be saved in the permanent default location when the
Accept button is pressed.< / p >
< p >
"Filesystem Size"
Root Methods make the filesystem the size which is
specified here.< / p >
< p >
"Compression"
Off by default to allow user-mode-linux testing. Turn on
compression when you are ready to use a Boot Method
which requires compression.< / p >
< p >
"Method" The root filesystem creation method.< / p >
< p >
"Template" The template associated with a Root Method.
Not all Root Methods
have templates.< / p >
< p >
"Generate" This puts the chosen Root Method in action.< / p >
< p >
"UML" Abbreviation for user-mode-linux.
This is a linux kernel which runs on
top of the host system's linux kernel and allows a you run a live root
filesystem.< / p >
< p >
"Accept"
This accepts the created root filesystem if it is found in the
temporary creation directory.
The UML box and the main section will now
reflect the path to this root filesystem.
You can now test with the UML
button or a put together a complete Boot/Root set with the Submit button.< / p >
< br > < br > < br > < br > < br > < br > < br >
< p > < P align = "center" > < b > User Mode Linux Box< / b > < / p >
< p > < IMG ALT = "" SRC = "images/uml_box.jpg" align = "right" >
"Xterm" Choose an xterm with its executable options switch.< / p >
< p >
"Options" Enter uml command-line options like: mem=64,
devfs=nomount.< / p >
< p >
"Root_Fs" Choose an uncompressed root filesystem.
Append with ubd?=.< / p >
< p >
"Abort" Abort user-mode-linux kernel processes. < / p >
< p > < P align = "center" > < b >
About the Yard Box< / b > < / p >
< p > < IMG ALT = "" SRC = "images/yard_box.jpg" align = "center" > < / p >
The Yard Box is a Root Method which is "Generated" from the Advanced Root
Section after a Template is chosen.
It has several interesting features.
< p >
The check boxes at the bottom represent the different stages involved in
creating a root filesystem.
The behavior of these stages may be altered in
three ways: Edit->Stages->one-by-one (default) will perform each stage
sequentially, stopping between each stage, the user may continue the process
by pressing the Continue button.
Edit->Stages->continuous proceeds non-stop
through all the stages.
Edit->Stages->'user defined' allows the user to
choose any stages the user wants, and will then proceed through all the
chosen stages.
Choosing only 'Check', 'Links & Deps', 'Create" is a good
example.< / p >
< p > < IMG ALT = "" SRC = "images/tests.jpg" align = "center" > < / p >
< p >
The behavior of some of the stages may be altered.
For instance Alt-T allows
you to choose which tests to run on the newly created
root filesystem.< / p >
< p > < IMG ALT = "" SRC = "images/template_search.jpg" align = "center" > < / p >
< p >
Press Alt-S to enable template text searching in either
direction.
Find exact matches or ignore case with the case sensitive check
box.< / p >
< p > < IMG ALT = "" SRC = "images/file.jpg" align = "center" > < / p >
< p >
Use Ctl-S to save the changes to an open template, and Alt-A to save the
template with a new name.
bOOTrOOT will not allow read-only templates or template links to be saved
with their own name.
A few of these example files are included.
You may make changes to them or clear their buffers.
Then you may save the template with a
different name.< / p >
< p > < IMG ALT = "" SRC = "images/stripping.jpg" align = "center" > < / p >
< p >
Edit->Settings->Stripping allows you to turn off/on stripping for
Libraries, Binaries, and Modules.
--strip-all is the default stripping
behavior, but Libraries may have this behavior changed to --strip-debug.< / p >
< p > < IMG ALT = "" SRC = "images/paths.jpg" align = "center" > < / p >
< p >
Edit->Setting->Paths allows you to prepend a new search path to your
environments $PATH variable.
< / p >
< p > < IMG ALT = "" SRC = "images/filesystem.jpg" align = "center" > < / p >
< p >
Edit->'File System" may alter the type of filesystem used to make the root
filesystem.
Because the filesystem is created on a loop device, some
filesystem types may complain or not be created at all.< / p >
< p > < IMG ALT = "" SRC = "images/replacements.jpg" align = "center" > < / p >
< p >
Edit->Replacements in your $HOME/.gbootroot/Replacements directory using
an editor of your choice.
< / p >
< p > < IMG ALT = "" SRC = "images/create.jpg" align = "center" > < / p >
< p >
Create->Replacements creates special replacement files.
Presently it creates
an fstab configuration file as Replacements/etc/fstab.new in
$HOME/.gbootroot/yard/.< / p >
< P > Little things you may want to know:< / P >
< P > * gBootRoot requires ash for initrd. Ash is a feather weight version of Bash.< / P >
< br >
< P > < IMG ALT = "" SRC = "images/gBSicon.jpg" align = "center" > < b > FAQ< / b > < / P >
< P > < b > What does the 2 disk compression method do?< / b > < / P >
< P > This Boot Method creates a boot disk with lilo, a kernel and an initrd
image. The
initrd script mounts another root disk with a compressed (gzip or bzip2)
filesystem.< / P >
< P > < b > What's the advantage of using this program?< / b > < / P >
< P > You can use a bzip2 compressed filesystem, this program is easy to use, and it provides a framework showing a simple initrd method which you can freely
modify. I wrote this program as an extension to BootRoot which was written
as a solution to help oster at EE (www.experts-exchange.com) create separate
boot and root floppies for an emergency system for his customers.< / P >
< P > < A href = "./bootroot.html" > BootRoot< / A >
was the original program, but it was decided that a GUI approach
provided the user much more versatility and power in creating distributions.
< / P >
< P > If you make a cool change to this program, or if this program helps you I'd love to know, that's better than receiving pizza. :)< / P >
< P > < b > How can I test gBootRoot?< / b > < / P >
< P > 1. Download
< a href = "http://prdownloads.sourceforge.net/user-mode-linux/root_fs_tomrtbt_1.7.205.bz2" >
root_fs_tomrtbt_1.7.205.bz2< / a > at Sourceforge.< / p >
< p >
2.
[Ctrl] ([Tab] to see available images)
< br > boot: bootdisk single [Enter]
< br > ( now filesystem is single user mode)
< br > exit [Enter]
< br > (now you are in multi user mode)
< p >
Better yet, do [Ctrl]
< br > boot: bootdisk 2 [Enter]
< P > < b > Why doesn't looplinux work as " bootdisk 1?" < / b > < / P >
< P > There is a difference between " 1" and " single." Looplinux was written in a
way that runlevel 1 doesn't work properly in relation to gBootRoot unless
single is used. And you thought they were the same thing? gBootRoot
proves otherwise. < / P >
< P > < b > gBootRoot doesn't start because it can't locate Gtk.pm?< / b > < / P >
< p > This program requires Gtk-Perl available from < a href = "http://www.perl.com/CPAN" > CPAN< / a > , < a href = "http://freshmeat.net/projects/gtk-perl" > Freshmeat< / a > or most GNU/Linux distributions.< / p >
< p > < b > There isn't enough room left on my 1440 floppy to make a Boot or Root
disk. Is there any way to free up more space apart from reducing
the size of the kernel?< / b > < / p >
< p >
Move the device size to 1722. This is a trick that < a href = "http://www.toms.net/rb/" > tomsrtbt< / a > uses on his famous rescue disk.< / p >
< p > < b > If you roll the floppy density counter down to 0 and then try go back
up towards 1440 and 1722, you get very funny figures.< / b > < / p >
< p >
This is because of the way Gtk works. There are two adjustments,
step and page increments. When you press your first mouse button the step
has been set to 282 so that a person can easily switch between 1440 and 1722.
When you use your second mouse button the page is set at 360. You can go
down to zero by pressing your third mouse button on the down arrow. Now
page up with the second button to 1440 and step with the first button to
1722. Pretty cool, eh?< / p >
< p > Why we are on this subject please check out these keyboard shortcuts for Gtk.< / p >
< P > Motion Shortcuts
< UL >
< LI > Ctrl-A Beginning of line < / LI >
< LI > Ctrl-E End of line < / LI >
< LI > Ctrl-N Next Line < / LI >
< LI > Ctrl-P Previous Line < / LI >
< LI > Ctrl-B Backward one character < / LI >
< LI > Ctrl-F Forward one character < / LI >
< LI > Alt-B Backward one word < / LI >
< LI > Alt-F Forward one word < / LI >
< / UL >
< P > Editing Shortcuts
< UL >
< LI > Ctrl-H Delete Backward Character (Backspace) < / LI >
< LI > Ctrl-D Delete Forward Character (Delete) < / LI >
< LI > Ctrl-W Delete Backward Word < / LI >
< LI > Alt-D Delete Forward Word < / LI >
< LI > Ctrl-K Delete to end of line < / LI >
< LI > Ctrl-U Delete line < / LI >
< / UL >
< P > Selection Shortcuts
< UL >
< LI > Ctrl-X Cut to clipboard < / LI >
< LI > Ctrl-C Copy to clipboard < / LI >
< LI > Ctrl-V Paste from clipboard < / LI >
< / UL >
< IMG ALT = "Larry Ewing's Penguin celebrates in gBootRoot." SRC = "images/peng-movie.4.gif" >
< br > < br > < br >
Contact me: Jonathan Rosenbaum < < a href = "freesource@users.sourceforge.net" > freesource@users.sourceforge.net< / a > >
< br >
Submit a Bug: < a href = "http://sourceforge.net/bugs/?group_id=9513" > gBootRoot Bug System< / a >
< br >
Join or browse the mailing lists: < a href = "http://sourceforge.net/mail/?group_id=9513" > gbootroot-{devel,user} mailing lists< / a >
< br >
Ask a question: < a href = "http://sourceforge.net/forum/forum.php?forum_id=29639" > Help Forum< / a >
< br >
Start a discussion: < a href = "http://sourceforge.net/forum/forum.php?forum_id=29638" > Open Discussion Forum< / a >
< p >
< / body > < / html >
