Move both of these files to a centralized location under replacements.

add-ons/yard/make-debian-X11/root/README-debian-X11

@@ -1,59 +0,0 @@
-Setting up a Swap File
-----------------------
-
-1. run make_swapfile in this directory:
-
-. make_swapfile
-
-
-Getting X working
------------------
-
-1. To get X11 working you will need to get your network up.  The instructions
-below assume your host (the computer you are running) has an ip of 192.168.1.4,
-a uml ip of 192.168.1.2 and a tap device ip of 192.168.1.5.
-
-2. If you haven't already done this, you will want to edit the 
-/etc/network/interfaces file using vi.  This should be self-explanatory.
-
-3. Load any modules required by your host system.  If you decide to use 
-tap, do this: 
-
-modprobe ethertap
-modprobe netlink_dev
-
-4. Configure the device on your host system.  Here the tap device is being
-set to 192.168.1.5 and then routed to the host 192.168.1.4:
-
-ifconfig tap0 192.168.1.5
-route add -host 192.168.1.4 gw 192.168.1.5
-
-5. The next time you start the uml kernel and boot the root_fs you will want 
-to give it options like this where  HWaddr (see ifconfig) belongs to your 
-network device:
-
-ubd0=/root_fs_debian_x11 root=/dev/ubd0 eth0=ethertap,tap0,HWaddr,192.168.1.5 mem=64M
-
-Hint: An easier way to do this would be to use the UML box in gbootroot from
-your host computer.  No ..  uml doesn't work within uml. :)
-
-6. At this point you should be able to ping 192.168.1.4.
-
-Hint: Check to make sure that uml_net came bundled with the uml kernel,
-because this is what enables networking.
-
-6.  Run startx.  It will ask for your host ip number.
-
-That's it.  
-
-Links:
-user-mode-linux.sourceforge.net
-
-Hints:
-Mount the host fs:  mount -t hostfs none /mnt
-		    mount -t hostfs none -o /home /mnt
-
-Jonathan Rosenbaum
-freeesource@users.sourceforge.net
-
-

add-ons/yard/make-debian-X11/root/make_swapfile

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-dd if=/dev/zero of=/swapfile bs=1024 count=32768
-mkswap /swapfile
-swapon /swapfile
-echo "Done."