|
|
|
@ -1,4 +1,4 @@ |
|
|
|
$Id: README-debian-X11,v 1.4 2001/11/08 06:16:29 freesource Exp $ |
|
|
|
$Id: README-debian-X11,v 1.7 2001/12/12 01:00:09 freesource Exp $ |
|
|
|
make_debian-X11 replacement |
|
|
|
|
|
|
|
Setting up the root filesystem |
|
|
|
@ -23,10 +23,13 @@ Getting X working |
|
|
|
below assume your host (the computer you are running) has an ip of 192.168.1.4, |
|
|
|
a uml ip of 192.168.1.2 and a tap device ip of 192.168.1.5. |
|
|
|
|
|
|
|
2. If you haven't already done this, you will want to edit the |
|
|
|
2. You may need to give X server access control for the uml instance by |
|
|
|
typing this on your host machine: xhost +192.168.1.2 |
|
|
|
|
|
|
|
3. If you haven't already done this, you will want to edit the |
|
|
|
/etc/network/interfaces file using vi. This should be self-explanatory. |
|
|
|
|
|
|
|
3. You don't need to load any modules required by your host system, because |
|
|
|
4. You don't need to load any modules required by your host system, because |
|
|
|
uml_net will cause the modules to be loaded automatically - assuming your |
|
|
|
kernel has kmod - when it automatically configures the tap device interface |
|
|
|
for ethertap. But if you want or need to do it manually from your host |
|
|
|
@ -37,19 +40,19 @@ system, you could do something like this: |
|
|
|
ifconfig tap0 192.168.1.5 |
|
|
|
route add -host 192.168.1.4 gw 192.168.1.5 |
|
|
|
|
|
|
|
4. The next time you start the uml kernel and boot the root_fs you will want |
|
|
|
5. The next time you start the uml kernel and boot the root_fs you will want |
|
|
|
to give it options like this where HWaddr (see ifconfig) belongs to your |
|
|
|
network device: |
|
|
|
|
|
|
|
ubd0=/root_fs_debian_x11 root=/dev/ubd0 eth0=ethertap,tap0,HWaddr,192.168.1.5 mem=64M |
|
|
|
|
|
|
|
5. At this point you should be able to ping 192.168.1.4. |
|
|
|
6. At this point you should be able to ping 192.168.1.4. |
|
|
|
|
|
|
|
Hint: Check to make sure that uml_net came bundled with the uml kernel, |
|
|
|
because this is what enables networking, and make sure it is setuid root |
|
|
|
(chmod 4755). |
|
|
|
|
|
|
|
6. Run startx. It will ask for your host ip number. |
|
|
|
7. Run startx. It will ask for your host ip number. |
|
|
|
|
|
|
|
That's it. |
|
|
|
|
|
|
|
|
freesource
23 years ago