diff --git a/yard/replacements/etc/inittab.example-agetty-helper b/yard/replacements/etc/inittab.example-agetty-helper
new file mode 100644
index 0000000..196ac23
--- /dev/null
+++ b/yard/replacements/etc/inittab.example-agetty-helper
@@ -0,0 +1,87 @@
+# $Id: inittab.example.agetty-slack,v 1.1 2001/12/03 20:42:03 freesource Exp $
+# Used by Example.yard
+#
+# inittab	This file describes how the INIT process should set up
+#		the system in a certain run-level.
+#
+# Version:	@(#)inittab		2.04	17/05/93	MvS
+#                                       2.10    02/10/95        PV
+#                                       3.00    02/06/1999      PV
+#
+# Author:	Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+# Modified by:	Patrick J. Volkerding, <volkerdi@ftp.cdrom.com>
+#
+
+# These are the default runlevels in Slackware:
+#   0 = halt
+#   1 = single user mode
+#   2 = unused (but configured the same as runlevel 3)
+#   3 = multiuser mode (default Slackware runlevel)
+#   4 = X11 with KDM/GDM/XDM (session managers)
+#   5 = unused (but configured the same as runlevel 3)
+#   6 = reboot
+
+# Default runlevel. (Do not set to 0 or 6)
+id:3:initdefault:
+
+# System initialization (runs when system boots).
+si:S:sysinit:/etc/init.d/rcS
+
+# Script to run when going single user (runlevel 1).
+su:1S:wait:/sbin/sulogin
+
+# Script to run when going multi user.
+rc:2345:wait:/etc/init.d/rc
+
+# What to do at the "Three Finger Salute".
+ca::ctrlaltdel:/sbin/shutdown -t5 -rf now
+
+# Runlevel 0 halts the system.
+l0:0:wait:/etc/init.d/halt
+
+# Runlevel 6 reboots the system.
+l6:6:wait:/etc/init.d/reboot
+
+# What to do when power fails (shutdown to single user).
+pf::powerfail:/sbin/shutdown -f +5 "THE POWER IS FAILING"
+
+# If power is back before shutdown, cancel the running shutdown.
+pg:0123456:powerokwait:/sbin/shutdown -c "THE POWER IS BACK"
+
+# If power comes back in single user mode, return to multi user mode.
+ps:S:powerokwait:/sbin/init 3
+
+# The getties in multi user mode on consoles an serial lines.
+#
+# NOTE NOTE NOTE adjust this to your getty or you will not be
+#                able to login !!
+#
+# Note: for 'agetty' you use linespeed, line.
+# for 'getty_ps' you use line, linespeed and also use 'gettydefs'
+c1:1235:respawn:/sbin/agetty 38400 ttys/0 linux
+##c2:1235:respawn:/sbin/agetty 38400 ttys/1 linux
+##c3:1235:respawn:/sbin/agetty 38400 ttys/2 linux
+#c4:1235:respawn:/sbin/agetty 38400 tty4 linux
+#c5:1235:respawn:/sbin/agetty 38400 tty5 linux
+#c6:12345:respawn:/sbin/agetty 38400 tty6 linux
+
+# Serial lines
+#s1:12345:respawn:/sbin/agetty 19200 ttyS0 vt100
+#s2:12345:respawn:/sbin/agetty 19200 ttyS1 vt100
+
+# Dialup lines
+#d1:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS0 vt100
+#d2:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS1 vt100
+
+# Runlevel 4 used to be for an X window only system, until we discovered
+# that it throws init into a loop that keeps your load avg at least 1 all 
+# the time. Thus, there is now one getty opened on tty6. Hopefully no one
+# will notice. ;^)
+# It might not be bad to have one text console anyway, in case something 
+# happens to X.
+# x1:4:wait:/etc/rc.d/rc.4
+
+# End of /etc/inittab
+
+
+
diff --git a/yard/replacements/etc/inittab.example-mingetty-helper b/yard/replacements/etc/inittab.example-mingetty-helper
new file mode 100644
index 0000000..4ce921c
--- /dev/null
+++ b/yard/replacements/etc/inittab.example-mingetty-helper
@@ -0,0 +1,56 @@
+# $Id: inittab.example.mingetty-rpm,v 1.2 2001/12/03 20:11:03 freesource Exp $
+# Used by Example.yard
+#
+# inittab       This file describes how the INIT process should set up
+#               the system in a certain run-level.
+#
+# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+#               Modified for RHS Linux by Marc Ewing and Donnie Barnes
+#
+
+# Default runlevel. The runlevels used by RHS are:
+#   0 - halt (Do NOT set initdefault to this)
+#   1 - Single user mode
+#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
+#   3 - Full multiuser mode
+#   4 - unused
+#   5 - X11
+#   6 - reboot (Do NOT set initdefault to this)
+# 
+id:3:initdefault:
+
+# System initialization.
+si::sysinit:/etc/init.d/rcS
+
+l0:0:wait:/etc/init.d/halt 0
+l1:1:wait:/etc/init.d/rc 1
+l2:2:wait:/etc/init.d/rc 2
+l3:3:wait:/etc/init.d/rc 3
+l4:4:wait:/etc/init.d/rc 4
+l5:5:wait:/etc/init.d/rc 5
+l6:6:wait:/etc/init.d/reboot 6
+
+# Things to run in every runlevel.
+# ud::once:/sbin/update
+
+# Trap CTRL-ALT-DELETE
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# When our UPS tells us power has failed, assume we have a few minutes
+# of power left.  Schedule a shutdown for 2 minutes from now.
+# This does, of course, assume you have powerd installed and your
+# UPS connected and working correctly.  
+pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
+
+# If power was restored before the shutdown kicked in, cancel it.
+pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
+
+# Run gettys in standard runlevels
+
+# Run xdm in runlevel 5
+# xdm is now a separate service
+# x:5:respawn:/etc/X11/prefdm -nodaemon
+0:2345:respawn:/sbin/mingetty ttys/0
+##1:2345:respawn:/sbin/mingetty ttys/1
+##2:2345:respawn:/sbin/mingetty ttys/2
+#c:2345:respawn:/sbin/mingetty serial/0