freesource
04354d29d3
The proper ldd check is now used if a dynamically linked binary is detected
...
to require uClibc rather than libc6. The ldd from the default location of
/usr/i386-linux-uclibc/bin is used for uClibc.
2001-11-27 20:33:20 +00:00
freesource
dab981e68f
Fixed pam test so that the 3rd field rather than the 4th field is being
...
checked in the service-name files found in /etc/pam.d/. The 4th field is
acceptable for pam.conf. If a path is specified in either conf format,
that path will be checked, otherwise, either the pam default path of
/usr/lib/security or the FSSTD location /lib/security will be checked
for a match.
2001-11-27 20:09:08 +00:00
freesource
1501d365e3
Fixed nss test so that it checks for the right libnss_(function).so.$version.
...
The old versioning for libnss no longer applies.
2001-11-27 19:35:42 +00:00
freesource
97bc60ea6c
Had ldd set to the busybox type.
2001-11-26 19:29:58 +00:00
freesource
d1cd32b44d
Only gives $mtab a value on cancel if it is a bootloader check.
2001-11-26 08:22:34 +00:00
freesource
306cbc8cd0
Turned off the busybox test.
2001-11-26 07:07:04 +00:00
freesource
44a5828e82
This solves the problem of extra devices in boot_device_table.txt
2001-11-26 06:22:44 +00:00
freesource
f4d63b90d9
This does a great job of prompting the user if they have root privileges for lilo, they may
...
continue or stop the process. This uses mtab().
2001-11-26 05:59:05 +00:00
freesource
a9c5a6d0b8
The latest and greatest user-mode-linux: 2.2.15
2001-11-26 04:43:36 +00:00
freesource
e507aa375e
This almost creates a successful normal user boot disk .. but doesn't find /dev/fd0 despite
...
its existence. Also, rootdisk isn't created yet. Getting pretty close.
2001-11-23 06:38:02 +00:00
freesource
2eff37e59b
This makes the default replacement directory permanent, rather than calling it over and
...
over again. Right, now busyboxes ldd is being used in Yard.pm for some experiments.
2001-11-19 08:59:38 +00:00
freesource
a49dcf6c0d
This make sure that path included the Replacements dir .. to be improved more.
2001-11-18 20:06:52 +00:00
freesource
d50e13b210
This provides proper output when the path has been changed, basically, if
...
it is the same thing again, it won't be listed.
2001-11-18 07:11:11 +00:00
freesource
849725cb71
Path is now updated properly, only adding a new path if it doesn't already
...
exist.
2001-11-18 07:00:54 +00:00
freesource
38aaef1e04
This fixes the problem with paths only being allowed to be altered initally,
...
what was happening was that @paths couldn't be changed after they were
defined, but not any more.
2001-11-18 05:56:44 +00:00
freesource
780ac8b3d8
This works.
2001-11-18 04:36:03 +00:00
freesource
019afeb942
Can't have anything on the first line here.
2001-11-18 04:33:44 +00:00
freesource
6c6b41a760
# This is the revised link specification which is more
...
# intuitive and allows user-defined links.
# The file can be fictional. $abs_file_file means there is
# something on the right side. Generally, we want to use
# the file on the right as the real file.
Simply put, this is a much better approach to handling -> in the template,
and it works nicely. It produces warning when the file on the right can't
be discerned, but this is o.k..
2001-11-18 04:05:37 +00:00
freesource
80cb0748bb
Added -z to genext2fs.
2001-11-17 08:33:37 +00:00
freesource
5af731e25c
This allows tests to work properly from the Yard Box for non-root users,
...
chrooted tests disappear, it is assumed that most normal administrators
would never consider giving non-root users chroot capabilities, but you
never know, so only genext2fs is tested for, but room is left if another
fs is choosen.
2001-11-17 07:55:03 +00:00
freesource
caca3cae38
This solves a tough to discover bug. When root objcopy the permissions were
...
preserved for libraries, but this wasn't the case for non-root users. The
part which did preserve permissions with chmod didn't allow non-root users,
but with genext2fs this isn't a problem, though chown is. Anyways, when ld
or libc aren't 0755 basically the kernel can't find init. Problem solved.
2001-11-17 06:14:35 +00:00
freesource
3015d7f233
Added -p to objcopy.
2001-11-17 06:11:53 +00:00
freesource
9bc3e644f1
This handles error much better by making $error private, before it was global
...
so it's value remained on error which caused the YardBox to fail to work
properly.
2001-11-17 02:23:57 +00:00
freesource
b22b1d9bee
Added -r0 to genext2fs default for non-root user. Now if a genext2fs would
...
work for a non-root user, even though it appears exactly the same as the
root_fs created by root with the same template .. it just doesn't work.
2001-11-16 03:07:41 +00:00
freesource
8604aa6dd0
If Replacements are symlinks, the actual file linked to is copied, this helps
...
with the new structure of allowing symlinks in Replacements.
2001-11-15 07:48:23 +00:00
freesource
c25f039c0c
Fixed a mistake, added $rm as found in *-X11 to create escaped ::Id.
2001-11-15 02:34:55 +00:00
freesource
b0a6543983
The latest and greatest uml 2.4.14.
2001-11-14 19:15:23 +00:00
freesource
bfd43e2154
This adds $main::Id and generated by $0, diversions, status and available
...
can't have comments added, but they are in their own dpkg directory anyways.
2001-11-09 20:02:53 +00:00
freesource
157e8de6e4
CVS information is preserved.
2001-11-08 07:12:40 +00:00
freesource
abc92cf316
The majority of replacements except for passwd*, shadow, and ld.so.conf have
...
$Id$ and made by make_debian. Original CVS information is now preserved so
that non-root users can't edit global replacements, the basic idea is that
root will usually be using an editor like Emacs in
$HOME/.gbootroot/yard/Replacements which respects that CVS versioned files
outside of the repository are read-only. Users should make copies of
versioned replacements which they want to edit, for instance:
fstab.debian-1000
2001-11-08 07:12:09 +00:00
freesource
2f320d8728
Some important sources.
2001-11-08 06:25:43 +00:00
freesource
7973e6cfdf
Added $Id$
2001-11-08 06:17:04 +00:00
freesource
4b2f957f1c
Added make_debian created with
2001-11-08 05:59:48 +00:00
freesource
e2bae597d0
Added $Id$
2001-11-08 05:56:42 +00:00
freesource
c9d4b99c3b
Added $Id$
2001-11-08 05:50:20 +00:00
freesource
687910faaa
Changed $Id$
2001-11-08 03:19:36 +00:00
freesource
33e7205dde
O.k, this will work.
2001-11-07 19:07:44 +00:00
freesource
b15007a721
Testing $Id.
2001-11-07 19:03:55 +00:00
freesource
036d5d111b
Added $Id
2001-11-07 18:55:21 +00:00
freesource
682ca44096
$Id$ now put properly into the template.
2001-11-07 18:48:15 +00:00
freesource
319426440e
A different approach to $Id$
2001-11-07 18:35:06 +00:00
freesource
a21fa68f3e
Added $Id$
2001-11-07 18:26:39 +00:00
freesource
2b5179472b
Text additions.
2001-11-07 07:47:11 +00:00
freesource
6297583e9b
This puts the logic for the ARS device in the proper place in submit.
2001-11-07 01:17:39 +00:00
freesource
08b4a09338
Removed the commented out sections used to test.
2001-11-06 20:07:13 +00:00
freesource
338370c319
This does it! Now non-root users can create complete boot/root sets ..the
...
only catch is lilo, but working that one out.
2001-11-06 20:05:59 +00:00
freesource
12807a509e
If the ARS is never opened, $entry_advanced[3] eq "", so now when $um == 0
...
it defaults to the value for BOOT_DEVICE.
2001-11-06 19:16:57 +00:00
freesource
b26efaef3b
This is better because it checks to see if the real device is mounted,
...
ofcourse this is only necessary when lilo is used.
2001-11-06 08:30:02 +00:00
freesource
edf75d6081
Before device_table was popping off the first value assuming it was $mnt,
...
but this is no longer necessary, so this has been removed so that all devices
are made.
2001-11-06 07:36:20 +00:00
freesource
4f31aa18a8
Improves some info() output.
2001-11-06 07:29:19 +00:00
