freesource
59c8a5333e
This only checks Root_Fs for $ubd0, which makes a lot more sense and avoides
unecessary duplications.
23 years ago
freesource
bcf2987f21
This adds better memory ratios for blkmtd.
23 years ago
freesource
63dc15fe8e
Improves the mtd_init regexp even more.
23 years ago
freesource
2e41744e08
This makes for a better regexp .. will also match "/sbin/init 2" for mtd_init
23 years ago
freesource
24897ac61e
This goes a step farther an allows ubd to be ubd\d{1] rather then confined to
1, however, mtd and mtdblock will be 0 for the first module invocation.
23 years ago
freesource
80ebd88aef
This allow ubd0\w?, this works with mtdram, but causes blkmtd to fail.
23 years ago
freesource
86f767a446
Yard won't attempt to make /dev on compressed fs and ro if /dev is a symbolic
link, won't complain when there is an unitialized value in concatation in
Boot, Ramdisk_size is always 4096 for mtdram, this setting isn't really
necessary, but is left anyways.
23 years ago
freesource
4da04f8623
This adds ceil() to $total_size, and always makes sure that ramdisk_size is
at least 4096.
23 years ago
freesource
bf4200e3c5
Fixed a little bug where initrd= wasn't being passed. Everythings looks good
with the default Initrd.gz.
23 years ago
freesource
ecc03b1980
This completes the init and mtd_init recognization .. added single.
23 years ago
freesource
967df903ea
This adds the mtd_init option to the kernel command-line so that the
pivot_root routine can be interacted with, and also checks for alternative
runlevels, all assigned to $init.
23 years ago
freesource
74dd88069a
This is even nicer. It gives both mtdram and blkmtd the same memory parameters
for mem. Just have to watch out for that nasty cramfsck by Linus.
23 years ago
freesource
fadcb89061
More mem adjustments, this time to the spin wheel, 1024 for 1, 8192 for 2,
these are great setting for mtdram .. <16M files can use the small adj.
>16M should zero down with 3 and increment with 2nd button.
23 years ago
freesource
30a11e4bf2
A few more improvements to the mtd code to handle memory better 16M increments
for mtdram, will probably do a similiar thing for blkmtd which appears to be
exponential 16 32 64 etc .. ofcourse at 128 things can get narly.
23 years ago
freesource
6b3eda4286
This pretty much covers it, have both mtdram and blkmtd working, just need to
figure out where Initrd.gz will be stored.
23 years ago
freesource
7fcb2ca973
Worked out lots of issues with mem, even using POSIX, tested well for mtdram,
interface is almost there.
23 years ago
freesource
07694a9bf1
This sets up everything, and tests the new mtd interface, looks good.
23 years ago
freesource
f7921951e1
This keeps a nice size ration for $mtd_total_size, and automatically checks if
the root_fs is real.
23 years ago
freesource
3fcea5beb5
Now it has the look.
23 years ago
freesource
4920a10f03
Better sizing.
23 years ago
freesource
9de4fc1d56
Remembers state for the new mtd emulation.
23 years ago
freesource
935b5983c8
Added a MTD emulation line to the UML box and some functionality.
23 years ago
freesource
bf98923042
This properly deals with differening mconsole locations.
23 years ago
freesource
896f2a9519
Added cad "Ctrl-Alt-Del" to mconsole interface, and documented it.
Now looks for mconsole at both old location /tmp/uml/$umid/mconsole and
new location $ENV{HOME}/.uml/$umid/mconsole.
23 years ago
freesource
93b5f23410
Now files for uml_exclusively are made in create_expect_uml which is
effectively known as the create stage. This avoids the unecessary previous
requirement of having to select the copy stage again just to create a file
for /dev/ubd/0. The file created is sparse, got this idea from a discussion
Jeff had with a user on uml-user.
23 years ago
freesource
d2fb7540f3
This adds jffs/jffs2 construction, expect_uml will have to be changed a little
bit more, but have tested this with an initrd, and it works pretty nicely
even with large fs assuming mem is set high enough. Mtdram was chosen over
blkmtd for now.
23 years ago
freesource
033c61d043
Removed unecessary warning which warned that left-hand side replacements
couldn't be a directory if it happened to find that directory on the hostfs.
Directories can be replacements.
23 years ago
freesource
fddfcac837
Updated to 1.3.4
23 years ago
freesource
5f7d6c8941
Improved Replacements Box GUI.
23 years ago
freesource
dac5b05c88
Added a button to open up the Filesystem Box from the ARS, this is on the same
line as Filesystem Size.
23 years ago
freesource
77f64443e3
Getting ready for another release.
During the boot stage the filsystem type was used to determine whether
to use the genext2fs (non-root) method or the normal method used by root.
Now the user type is used, this is better because it prevents conflicts
if a different filesystem type is chosen, or if a non-root user changes to a
different filesystem type in the filesystem box and forgets to change back
to genext2fs; however, it prevents root from using the genext2fs method,
which isn't a problem. The sudo requirement for lilo is too much of a
requirement, and will be changed in future versions.
23 years ago
freesource
fb9b3ed43b
Fixed another non-root boot/root bug. The info had it correct, but the actual
copy with genext2fs was being done from the wrong location. This has been
fixed.
23 years ago
freesource
b14a469786
Had some testing code which was providing the wrong value for $compress, this
made non-root booting fail for bzip2 because bunzip2 didn't exist in the
initrd.
23 years ago
freesource
8cac3030ca
State is saved for the Compression off check box and the Root Filename save
check box.
23 years ago
freesource
b8ad37acb1
The UML Kernel entry box in the ARS remembers state now.
23 years ago
freesource
769e0b8200
Changed the behavior of save_as so that when compression is chosen, the
entry won't be the same as that found in Root Filename, but instead reflects
the newly compressed file. This change was precipitated by the previous
change to the Accept behavior.
23 years ago
freesource
6ab88fd8d2
Fixed a typo which made bz2 into gz since previous accept button change.
23 years ago
freesource
8d0983c78b
Prep for 1.3.2 release.
23 years ago
freesource
d813ad115d
This should fix the bug reported by Liav Asseraf. The main program was
rearragned and put in BootRoot, but the BEGIN block which sets up the FHS
for perl's INC was now in this file, so ofcourse, gbootroot couldn't find the
modules.
23 years ago
freesource
d64bb295d3
Time to update.
23 years ago
freesource
0a4e5df657
Fixed a grammar error in help.
23 years ago
freesource
110b8937d1
Changed the UML boxes Options entry tooltips, but makes me wonder whether the
behavior originally cited may be a good idea?
23 years ago
freesource
fe313e798e
Last changes before 1.3.1 release.
23 years ago
freesource
df3f36f9cc
Changed text for boot method, slight change in main file.
23 years ago
freesource
18ba567e2f
Improving doc.
23 years ago
freesource
413cde8525
Spelling change.
23 years ago
freesource
8d0a1f08a8
Added halt and reboot to the mconsole interface as well as a convenience ..
buttons can be used as well.
23 years ago
freesource
a53e4770cc
This adds switch, version and help and updates the doc.
23 years ago
freesource
48c5e15a32
Misc. changes.
23 years ago
freesource
e017fcaa55
A little experiment with reiserfs which didn't work on a loop device, ofcourse,
but is set-up if it ever does. More verbosity when dd runs.
23 years ago