#!/usr/bin/perl -w

#    gBootRoot Copyright (C) 2000
#    Lead Developer and Project Coordinator
#    Jonathan Rosenbaum <mttrader@access.mountain.net>
#
#    Developer
#    Cristian Ionescu-Idbohrn <cii@axis.com>
#
#    http://the.netpedia.net/gBootRoot.html

#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.

#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.

#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.


use Gtk;
use strict;

init Gtk;


# Perhaps you are wondering where to learn how to program with Gtk-Perl?
# There is an excellent tutorial by Stephen Wilhelm at
# http://personal.riverusers.com/~swilhelm/perlgtk/.  Please
# help support his development of this tutorial.  Another good place
# to learn from is test.pl in the Gtk/samples directory included with
# Gtk-Perl.

# If you want gBootRoot to do it's stuff somewhere else, change the
# value for $tmp1.
my $tmp1 = "/tmp";              # tmp should be default - Cristian
my $lilo_conf = "/etc/lilo.conf";

# CHANGES
#
#       1.2.2 - 09/03/2000
#                * Development is now at sourceforge.net/projects/gbootroot.
#                * Cristian Ionescu-Idbohrn 'cretzu' added as developer 
#                  08/13/2000.
#                * Advanced Section GUI added.
#                * Stripping (new) is now the default behavior.  Stripping 
#                  options are in AS.
#                * Cretzu's gdkbirdaao() " Guess Default Kernel Boot Image 
#                  Root Device And Append Options" is incorporated both in 
#                  beginner section and AS.
#                * Cameron Caffee <Cameron_C_Caffee@AtlanticMutual.com> sends
#                  detailed reports and helps with testing.  This leads to 
#                  the discovery of the need for stripping, as well as a 
#                  version check being incorporated into the program.
#                * Option for additional devices in boot disk added to AS.
#                * 'Changed' signal replaces 'activate' in entry widgets.
#                * Hard wired coding changes in initrd_heredoc(); 
#                  development drive can be different than boot drive;  
#                  added as an option to AS.
#                * Step increment changed for device size spinner button.
#                * New documentation and grammar corrections.
#                * Bugs closed: 111579, 112555, 112949, 111580, 11636, 12073,
#                  12215, 13385, 13453, 13455.
#
#       1.0.3 - 08.09.2000
#               * Tmp and mnt are now created on the fly,
#                 along with a new error function for mkdir(),
#                 Gtk clean-up for this, and clean-up by signal handler
#                 which should please Perlish and helpful Cristian.
#
#       1.0.2 - 08.06.2000
#               * Changed logic slightly in submit() with returns rather
#                 than a scalar to resolve a minor bug caused by some
#                 changes in the previous version.
#
#       1.0.1 - 08.05.2000
#               * Zas provided a correction for a Perl 5.6 error complaint.
#               * Zas found some unecessary GDK lines causing some Gtk
#                 warnings; these were commented out.
#               * Cristian Ionescu-Idbohrn found a bug caused by putting
#                 the Kernel or RootImage below the mount point.  An error
#                 check and error dialog were added.
#
#       1.0.0 - 08.02.2000
#               * First public release
#

#######################################################################
# Don't edit from here, but you can if you want to change the HERE docs
# and/or the contents of initrd (in which case you need to make sure the
# right libraries are copied over to initrd and the size is checked).

# I need to remember to edit this
my $version = "1.2.2";
my $date = "09.03.2000";
my $gtk_perl_version = "0.7002";
my $pwd = `pwd`; chomp $pwd;
use File::Basename;

my $initrd;
my $compress;
my $false = 0;
my $true = 1;
my $ok;
my $box2;
my $label;
my $label_advanced;
my $separator;
my $order;
my $text_window;
my @container;
my @original_container;
my $file_dialog;
my $error_window;
my ($kernel,$root_image,$device,$size);
my $mtab;
my ($tmp,$mnt);
my $norm_root_device;
my ($hbox_advanced); 
my $separator_advanced;
my @entry_advanced;
my $entry_advanced;
my ($ea1,$ea2,$ea3);
my $table_advanced;
my $button_count = 0;
my $obj_count = 0;
my ($lib_strip_check,$bin_strip_check);

# My own creation - the roots touch the ground if three lines are added.
       my @xpm_data = (
"32 45 3 1",
"       c None",
".      c SaddleBrown",
"X      c black",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...    ...                   ",
"   ...     ..                   ",
"  ...      ...                  ",
"  ...       ...                 ",
" ....        ...                ",
" ....         ...               ",
" ....          ...              ",
" ....           .............   ",
" .....           .............  ",
" ......           ............. ",
" .......                     ...",
".........                     ..",
"................................",
"................................",
"............................... ",
"......... XXXXX   ............  ",
"........   XXX      ..........  ",
"........   XXX      ........    ",
"         XXXXXX                 ",
"    XXX  XXX   X XX XX          ",
"   X  XXXXX     X   X X         ",
"  XX  XXX       X       XX      ",
" X    XX        X         X     ",
" X    XX        X      XX X     ",
" XX   XX         X    XXXXX     ",
"  X   XXXX XXX    XXXXX   X     ",
" XX   XX      XX    X     XX    ",
" X     X       X    X      X    ",
" X     XX       X   XX     X    ",
" X      XX      XX         X    ",
" X      XX       XXXXXXX XXX    ",
" XX    XX               XXX     ",
"  XX  XX      XXXX     XX XX    ",
"  XX XXX      X  XXXXXXX   X    ",
"  X   XXX     X            XX   ",
"        XX    XXXXXXX       XXX ",
"         X          XX        X ",
"          X          X          "
                        );

$SIG{INT} = \&signal;
$SIG{ABRT} = \&signal;
$SIG{TERM} = \&signal;
$SIG{QUIT} = \&signal;
$SIG{KILL} = \&signal;

(undef,$container[1],$container[11]) = gdkbirdaao();

if (!-d $tmp1) {
    if (-e $tmp1) {
       error_window(
          "gBootRoot: ERROR: A file exists where $tmp1 should be");
    }
    else {
        my @directory_parts = split(m,/,,$tmp1);
        my $placement = "/";
          for (1 .. $#directory_parts) {
              $_ == 1 ? ($placement = "/$directory_parts[$_]")
              : ($placement = $placement . "/" . $directory_parts[$_]);
              -d $placement or err_custom_perl(
              "mkdir $placement","gBootRoot: ERROR: Could not make $tmp1");
           }
    }
}

if (!-d "$tmp1/gbootroot_tmp$$") {
  $tmp = "$tmp1/gbootroot_tmp$$" if err_custom_perl(
         "mkdir $tmp1/gbootroot_tmp$$",
         "gBootRoot: ERROR: Could not make temporary directory") != 2;
}
if (!-d "$tmp1/gbootroot_mnt$$") {
 $mnt = "$tmp1/gbootroot_mnt$$" if err_custom_perl(
        "mkdir $tmp1/gbootroot_mnt$$",
        "gBootRoot: ERROR: Could not make mount directory") != 2;
}
my $verbosefn = "$tmp/verbose";


# Right now >= 0.7000 is o.k.
if (Gtk::check_version("1","0","7") =~ /too old/) {
    error_window("gBootRoot is presently being developed with gtk-perl" . 
                 " version $gtk_perl_version.\nYou are using a" .
                 " version of gtk-perl < 0.7000.  You may still be able\n" .
                 " to use this program, but you may encounter problems." .
                 " See the FAQ\nfor places to get a newer gtk-perl version." .
                 " \n\nThe most common error reported:\n\"Can't locate" .
                 "  object  method\""
                 
        ,"center");
    print "Using a version of gtk-perl < 0.7000\n";
}

my $window = new Gtk::Window("toplevel");
# special policy
$window->set_policy( $false, $true, $true );
$window->set_title("gBootRoot");
$window->set_position('center');
$window->signal_connect("destroy",
                        sub {
                          unlink "$verbosefn", "$tmp/initrd_image.gz";
                          rmdir "$tmp/initrd_mnt";
                          rmdir "$tmp";
                          rmdir "$mnt";
                          Gtk->exit(0);
                        });
$window->border_width(1);
$window->realize;

# Do the iconizing thing
# "xpm/circles.xpm" can be @pixmap within file if not create_from_xpm.
my ($circles,$mask) = Gtk::Gdk::Pixmap->create_from_xpm_d($window->window,
                                                        $window->style->white,
                                                        @xpm_data);
$window->window->set_icon(undef, $circles, $mask);
$window->window->set_icon_name("gBootRoot");
#$window->window->set_decorations(['all', 'menu']); # Zas
#$window->window->set_functions(['all', 'resize']); # Zas

my $tooltips = new Gtk::Tooltips();

my $box1 = new Gtk::VBox($false,0);
$window->add($box1);
$box1->show();

# First row
hbox();
my $entry = entry($false,0);

# Menu - later this may be improved if new methods are added.
my $opt = new Gtk::OptionMenu();
$tooltips->set_tip( $opt, "Choose the Boot method.", "" );
my $menu = new Gtk::Menu();
my $item = new Gtk::MenuItem("Method -> lilo" );
$item->show();
$item->signal_connect( 'activate',sub { $entry->set_text("lilo");
                                        $container[0] = "lilo"});
$menu->append( $item );
$opt->set_menu( $menu );
$box2->pack_start( $opt, $true, $true, 0 );
$opt->show();
$box2->show();

# Second row
hbox();
my $entry2 = entry($true,1);
$entry2->set_text($container[1]);
button("Kernel Selection",$entry2,"Kernel Selection",1);

# Third row
hbox();
my $entry3 = entry($true,2);
button("Compressed Filesystem",$entry3,"Compressed Filesystem",2);

# In the future, if experimenters send in data, there will be two
# different devices.
# Fourth row
hbox();
my $entry4 = entry($true,3);
$container[3] = "/dev/fd0";
$entry4->set_text($container[3]);
button("Device Selection",$entry4,"Device Selection",3,$true);

# Fifth row
hbox("what");
my $adj = new Gtk::Adjustment( 1722.0, 0.0, 360000000.0, 282.0, 360.0, 0.0 );
my $spinner = new Gtk::SpinButton( $adj, 0, 0 );
$tooltips->set_tip( $spinner, "Choose the Device Size.", "" );
$spinner->set_wrap( $true );
$spinner->set_numeric( $true );
$spinner->set_shadow_type( 'in' );
$spinner->show();
$container[4] = 1722; # A better value - a rtbt trick.
$adj->signal_connect( "value_changed", sub {
    $container[4] = $spinner->get_value_as_int();});
$box2->pack_start( $spinner, $true, $true, 0 );
label("Device Size");

# gz and bz2 radio buttons
my $rbutton = new Gtk::RadioButton( "gz" );
$tooltips->set_tip( $rbutton, "Choose Compression used on the Filesystem.", "" );
my $gz_toggle = $rbutton;
$rbutton->set_active( $true );
$box2->pack_start( $rbutton, $false, $false, 0 );
$rbutton->show();
$rbutton = new Gtk::RadioButton( "bz2", $rbutton );
$rbutton->set_usize(1,1);
$tooltips->set_tip( $rbutton, "Choose Compression used on the Filesystem.", "" );
my $bz2_toggle = $rbutton;
$box2->pack_start( $rbutton, $true, $true, 0);
$rbutton->show();

# Size status entry
my $entry5 = new Gtk::Entry();
$entry5->set_editable( $false );
$tooltips->set_tip( $entry5, "This shows room remaining on the Device.", "" );
$entry5->set_usize(15,20);
$box2->pack_start( $entry5, $true, $true, 0 );
$entry5->show();

# The ADVANCED BOOT SECTION 
###########################
# Separator
$separator = new Gtk::HSeparator();
$box1->pack_start( $separator, $false, $true, 0 );
$separator->show();

# This is cool how this works.
my $vbox_advanced = new Gtk::VBox($false,0);
$box1->add($vbox_advanced);
$vbox_advanced->show();

# The Advanced Section button
hbox_advanced();
my $button_advanced = new Gtk::Button("Advanced Boot Section");
$tooltips->set_tip( $button_advanced, "Change settings for the bootdisk.", "" );
$button_advanced->signal_connect("clicked",\&advanced_section );
$hbox_advanced->pack_start( $button_advanced, $true, $true, 0 );
$button_advanced->show();
###########################

# Separator
$separator = new Gtk::HSeparator();
$box1->pack_start( $separator, $false, $true, 0 );
$separator->show();

# Status bar
my $align = new Gtk::Alignment( 0.5, 0.5, 0, 0 );
$box1->pack_start( $align, $false, $false, 5);
$align->show();
my $pbar = new Gtk::ProgressBar();
$pbar->set_usize(321,10); # 321 10
$align->add($pbar);
$pbar->show();

# Separator
$separator = new Gtk::HSeparator();
$box1->pack_start( $separator, $false, $true, 0 );
$separator->show();

# Submit button
hbox();
my $sbutton = new Gtk::Button("Submit");
$sbutton->signal_connect( "clicked", \&submit);
$tooltips->set_tip( $sbutton, "Generate the Boot/Root set.", "" );
$sbutton->show();
$box2->pack_start( $sbutton, $true, $true, 0 );
$box2->show();

# Close button
my $cbutton = new Gtk::Button("Close");
$cbutton->signal_connect("clicked",
                         sub {
                           unlink "$verbosefn", "$tmp/initrd_image.gz";
                           rmdir "$tmp/initrd_mnt";
                           rmdir "$tmp";
                           rmdir "$mnt";
                           Gtk->exit(0);
                         });

$tooltips->set_tip( $cbutton, "Exit gBootRoot.", "" );
$cbutton->show();
$box2->pack_start( $cbutton, $true, $true, 0 );
$box2->show();

# Help button
my $hbutton = new Gtk::Button("Help");
$hbutton->signal_connect( "clicked", \&create_text);
$tooltips->set_tip( $hbutton, "Help about gBootRoot.", "" );
$hbutton->show();
$box2->pack_start( $hbutton, $true, $true, 0 );
$box2->show();

$window->show();
main Gtk;
exit( 0 );

#----------------------------

# This works on GNU/Linux
sub signal {
   $SIG{INT} = \&signal;
   $SIG{ABRT} = \&signal;
   $SIG{TERM} = \&signal;
   $SIG{QUIT} = \&signal;
   $SIG{KILL} = \&signal;
   unlink "$verbosefn", "$tmp/initrd_image.gz";
   rmdir "$tmp/initrd_mnt";
   rmdir "$tmp";
   rmdir "$mnt";
   Gtk->exit(0);
}

sub hbox_advanced {
    $hbox_advanced = new Gtk::HBox(1,1 );
    $hbox_advanced->border_width( 2 ); # was 10
    $hbox_advanced->set_usize(321, 20);
    $vbox_advanced->pack_start( $hbox_advanced, $false, $false, 0 );
    show $hbox_advanced;
}

sub objcopy_right_click_advanced {

  my ( @data ) = @_;
  my $event = pop( @data );
          
  if ( ( defined( $event->{'type'} ) ) 
      and ( $event->{'type'} eq 'button_press' ) ) {
      if ( $event->{'button'} == 3 ) {
	  if ($obj_count == 0) {
             $tooltips->set_tip( $lib_strip_check, 
                           "This is generally a good idea.  Press the" .
                           " right mouse button to change from" .
                           " [objcopy --strip-all] to" .
                           " [objcopy --strip-debug].", "" );
             $obj_count++;
          }
          else {
              $tooltips->set_tip( $lib_strip_check, 
                           "This is generally a good idea.  Press the" .
                           " right mouse button to change from" .
                           " [objcopy --strip-debug] to" . 
                           " [objcopy --strip-all].", "" );
	      $obj_count--;
          }
      }
  }

}


sub advanced_section {

    if ($button_count == 0) {  
       #$vbox_advanced->set_usize(321,300);
	my $boolean;

       # The strip section
       $table_advanced = new Gtk::Table( 4, 3, $true );
       $vbox_advanced->pack_start( $table_advanced, $true, $true, 0 );
       $table_advanced->show();
       
       # lib_strip_check
       label_advanced("Stripping:",0,1,0,1);
       !defined $lib_strip_check ? ($boolean = 1) 
         : ($boolean = $lib_strip_check->get_active());
       $lib_strip_check = new Gtk::CheckButton("Libraries");
       $lib_strip_check->set_active($boolean);
       $lib_strip_check->signal_connect( "button_press_event", 
                                          \&objcopy_right_click_advanced); 
       $tooltips->set_tip( $lib_strip_check, 
                           "This is generally a good idea.  Press the" .
                           " right mouse button to change from" .
                           " [objcopy --strip-debug] to" . 
                           " [objcopy --strip-all].", "" );
       #$hbox_advanced->pack_start( $lib_strip_check, $false, $false, 0);
       $table_advanced->attach($lib_strip_check,1,2,0,1, 
                               ['expand'],['fill','shrink'],0,0);
       show $lib_strip_check;

       # bin_strip_check
       !defined $bin_strip_check  ? ($boolean = 1) 
         : ($boolean = $bin_strip_check->get_active());
       $bin_strip_check = new Gtk::CheckButton("Binaries");
       $bin_strip_check->set_active($boolean);
       $tooltips->set_tip( $bin_strip_check, 
                           "This is generally a good idea." .
                           " [objcopy --strip-all]", "" );
       #$hbox_advanced->pack_start( $bin_strip_check, $true, $true, 0);
       $table_advanced->attach($bin_strip_check,2,3,0,1, 
                               ['expand'],['fill','shrink'],0,0);
       show $bin_strip_check;

       # Development Drive
       label_advanced("Devel Device:",0,1,1,2);
       $ea1 = entry_advanced(1,2,1,2,0);
       $tooltips->set_tip( $ea1, "If the device used for development" .
                                 " is different than the actual boot" . 
                                 " device, use this field" .
                                 " to indicate that device." .
                                 "  You will have to run" .
                                 " lilo -v -C brlilo.conf -r" .
                                 " \"device mount point\" manually at a" . 
                                 " later time on the actual" . 
                                 " boot device.",
                                 "" ); 
       $ea1->set_text($container[3]) if defined $container[3];

       # Optional Device(s)
       label_advanced("Opt. Device(s)",0,1,2,3);
       $ea2 = entry_advanced(1,2,2,3,1);
       $tooltips->set_tip( $ea2, "Add devices to the boot disk which are" .
                                 " necessary for the kernel to function" .
                                 " properly.  Put a space between each" .
                                 " device.  For instance, /dev/fb0 for" .
                                 " frame buffer devices.", 
                                    "");
       $ea2->set_text($entry_advanced[1]) if defined $entry_advanced[1];

       # Append Options
       label_advanced("append =",0,1,3,4);
       $ea3 = entry_advanced(1,3,3,4,2);
       my $append; (undef,undef,$append) = gdkbirdaao();
       $tooltips->set_tip( $ea3, "Add append options to brlilo.conf.", "");
       $ea3->set_text($append) if defined $append;

       # Verbosity section

       $button_count++;
    }
    else {
       destroy $table_advanced;
       $button_count--;
    }

} # end sub advanced_section

print @entry_advanced;

sub entry_advanced {

    my $numa = $_[4];
    my $entry_advanced = new Gtk::Entry();
    $entry_advanced->set_editable( $true );
    $entry_advanced->signal_connect( "changed", sub {
    $entry_advanced[$numa] = $entry_advanced->get_text();} );
    $entry_advanced->set_usize(100,20);
    $table_advanced->attach($entry_advanced,$_[0],$_[1],$_[2],$_[3], 
                            ['shrink','fill','expand'],['fill','shrink'],0,0);
    show $entry_advanced;
    return $entry_advanced;

}

sub separator_advanced {

    $separator_advanced = new Gtk::HSeparator();
    $vbox_advanced->pack_start( $separator_advanced, $false, $true, 0 );
    $separator_advanced->show();

}

sub label_advanced {

    my($text) = @_;

    $label_advanced = new Gtk::Label( $text );
    $label_advanced->set_justify( "fill" );
    $table_advanced->attach($label_advanced,$_[1],$_[2],$_[3],$_[4], ['expand'],['fill','shrink'],0,0);
    $label_advanced->show();

}

sub create_text {

      if (not defined $text_window) {
       $text_window = new Gtk::Window "toplevel";
       $text_window->signal_connect("destroy", \&destroy_window,
                                    \$text_window);
       $text_window->signal_connect("delete_event", \&destroy_window,
                                    \$text_window);
       $text_window->set_title("Help");
       $text_window->set_usize( 500, 600 );
       $text_window->set_policy( $true, $true, $false );
       $text_window->set_title( "gBootRoot Help" );
       $text_window->border_width(0);

       my $main_vbox = new Gtk::VBox( $false, 0 );
       $text_window->add( $main_vbox );
       $main_vbox->show();

       my $vbox = new Gtk::VBox( $false, 10 );
       $vbox->border_width( 10 );
       $main_vbox->pack_start( $vbox, $true, $true, 0 );
       $vbox->show();

       my $table = new Gtk::Table( 2, 2, $false );
       $table->set_row_spacing( 0, 2 );
       $table->set_col_spacing( 0, 2 );
       $vbox->pack_start( $table, $true, $true, 0 );
       $table->show( );

       # Create the GtkText widget
       my $text = new Gtk::Text( undef, undef );
       $text->set_editable($false);
       $table->attach( $text, 0, 1, 0, 1,
                       [ 'expand', 'shrink', 'fill' ],
                       [ 'expand', 'shrink', 'fill' ],
                       0, 0 );
       $text->show();

       # Add a vertical scrollbar to the GtkText widget
       my $vscrollbar = new Gtk::VScrollbar( $text->vadj );
       $table->attach( $vscrollbar, 1, 2, 0, 1, 'fill',
                       [ 'expand', 'shrink', 'fill' ], 0, 0 );
       $vscrollbar->show();

       $text->freeze();
       $text->insert( undef, undef, undef, help() );
       $text->thaw();

       my $separator = new Gtk::HSeparator();
       $main_vbox->pack_start( $separator, $false, $true, 0 );
       $separator->show();

       $vbox = new Gtk::VBox( $false, 10 );
       $vbox->border_width( 10 );
       $main_vbox->pack_start( $vbox, $false, $true, 0 );
       $vbox->show();

       my $button = new Gtk::Button( "Close" );
       $button->signal_connect( 'clicked', sub { destroy $text_window; } );
       $vbox->pack_start( $button, $true, $true, 0 );
       $button->can_default( $true );
       $button->grab_default();
       $button->show();
       }
       if (!visible $text_window) {
                show $text_window;
       } else {
                destroy $text_window;
       }
} # end sub create_text

sub make_menu_item {
    my( $name, $callback, $data ) = @_;
    my $item;

    $item = new Gtk::MenuItem( $name );
    $item->signal_connect( "activate", $callback, $data );
    $item->show();

    return $item;
}

sub fileselect {

    my ($widget,$ent,$name,$order,$device) = @_;

    if (not defined $file_dialog) {
        # Create a new file selection widget
        $file_dialog = new Gtk::FileSelection( "$name" );
        $file_dialog->signal_connect( "destroy",
                                     \&destroy_window, \$file_dialog);
        $file_dialog->signal_connect( "delete_event",
                                     \&destroy_window, \$file_dialog);

        # Connect the ok_button to file_ok_sel function
        $file_dialog->ok_button->signal_connect( "clicked",
                                         \&file_ok_sel,
                                         $file_dialog,$ent,$order);

        # Connect the cancel_button to destroy the widget
        $file_dialog->cancel_button->signal_connect( "clicked",
                                              sub { destroy $file_dialog } );
         $file_dialog->set_filename( "/dev/fd0" ) if defined $device;
         $file_dialog->set_position('mouse');

     }
     if (!visible $file_dialog) {
         show $file_dialog;
     }
     else {
        destroy $file_dialog;
     }

} # end sub fileselect


# Get the selected filename and print it to the text widget
sub file_ok_sel {

    my( $widget, $file_selection,$entry,$order) = @_;
    my $file = $file_selection->get_filename();
    $entry->set_text($file);
    $container[$order] = $file;

    # auto-detect compression if system has file
    if ($container[2]) {
        my $file = system "which file > /dev/null 2>&1";
        if ($file == 0) {
           open(F,"file $container[2]|"); # no error check here
             while (<F>) {
                if (/gzip/) {
                  $gz_toggle->set_active( $true );
                }
                elsif (/bzip2/) {
                  $bz2_toggle->set_active( $true );
                }
             }
        }
    }

    destroy $file_dialog;

}

# pulled from test.pl
sub destroy_window {
        my($widget, $windowref, $w2) = @_;
        $$windowref = undef;
        $w2 = undef if defined $w2;
        0;
}


sub hbox {
    my $homogeneous;
    defined $_[0] ? ($homogeneous = 0) : ($homogeneous = 1);
    $box2 = new Gtk::HBox( $homogeneous, 5 );
    $box2->border_width( 2 ); # was 10
    $box1->pack_start( $box2, $true, $true, 0 );
    #$box1->pack_start( $box2, $false, $true, 0 );
    $box2->show();
}

sub label {

    my($text) = @_;

    $label = new Gtk::Label( $text );
    $label->set_justify( "fill" );
    $box2->pack_start( $label, $false, $false, 5 );
    $label->show();

}

sub entry {

    my($edit,$num) = @_;

    my $entry = new Gtk::Entry();
    $entry->set_editable( $true );

    if ($num == 0) {
        $entry->signal_connect( "activate", sub {
                $container[$num] = $entry->get_text();}); 
    }
    else {
         $entry->signal_connect( "changed", sub {
                 $container[$num] = $entry->get_text();
                 if (defined $ea1 and $num == 3) { 
                     $ea1->set_text($container[$num]); 
                 } 
     
                 # auto-detect compression if system has file
                 if ($num == 2) {
                     my $file = system "which file > /dev/null 2>&1";
                     if ($file == 0) {
		       if ($container[2]) {
                       open(F,"file $container[2]|"); # no error check here 
                          while (<F>) {
                             if (/gzip/) {
                               $gz_toggle->set_active( $true );
                             }
                             elsif (/bzip2/) {
                               $bz2_toggle->set_active( $true );
                             }
                          }
                       }  
                     }
                 }
                                                 });
     }
    if (defined $num and $num != 0) {
     my $todo;
     if ($num == 1) {
         $todo = "the Kernel";
     }
     elsif ($num == 2) {
         $todo = "the Compressed Filesystem";
     }
     else {
         $todo = "the Device to use";
     }
     $tooltips->set_tip( $entry,
       "Type in the location of $todo.", "" );
    }
    $box2->pack_start( $entry, $true, $true, 0 );
    $entry->show();

    return $entry;

}

sub button {

    my ($text,$ent,$name,$order,$device) = @_;

    my $button = new Gtk::Button($text);
    if ($order == 1) {
      $tooltips->set_tip( $button, "Select the Kernel.", "" );
    }
    elsif ($order == 2) {
      $tooltips->set_tip( $button, "Select the Compressed Filesystem.", "" );
    }
    else {
      $tooltips->set_tip( $button, "Select the Device.", "" );
    }
    $button->signal_connect( "clicked",\&fileselect,$ent,$name,$order,$device);
    $button->show();
    $box2->pack_start( $button, $true, $true, 0 );
    $box2->show();

}

sub submit {

      my($kernel,$root_image);

      # comment this out for testing
      unlink("$verbosefn");
      open (MTAB, "/etc/mtab") or die "no mtab!\n";
      while (<MTAB>) {
         if (m,$mnt,) {
           system "umount $mnt >> $verbosefn 2>&1";
         }
      }
      close(MTAB);
      $entry5->set_text("");
      pb("boot",0);

    if ($gz_toggle->active) {
        $compress = "gzip";
    }
    elsif ($bz2_toggle->active) {
        $compress = "bzip2";
    }

# Run some checks
if (!defined $container[0]) {
    error_window("gBootRoot: ERROR: No method supplied");
    return;
}
if (defined $container[1] && -e $container[1] && !-d $container[1]) {
    $kernel = $container[1];
    # Better be sure it isn't in the mount directory
    if ($kernel =~ m,^$mnt,) {
      error_window("gBootRoot: ERROR: Kernel found below Device mount point: $mnt");
      return;
    }

}
elsif (defined $container[0])  {
    error_window("gBootRoot: ERROR: Kernel not found");
    return;
}
if (defined $container[2] && -e $container[2] && !-d $container[2] ) {
    $root_image = $container[2];
    if ($root_image =~ m,^$mnt,) {
      # Bug revealed by Cristian Ionescu-Idbohrn <cii@axis.com>
      error_window("gBootRoot: ERROR: Rootimage found below Device mount point: $mnt");
      return;
    }
}
elsif (defined $container[0] && defined $container[1]) {
    error_window("gBootRoot: ERROR: Rootimage not found");
    return;
}
# we need to check for this, too.
if (defined $container[3] && -e $container[3] && !-d $container[3] ) {
         $device = $container[3];
}
elsif (defined $container[0] && defined $container[1]
       && defined $container[2]) {
    error_window("gBootRoot: ERROR: Device not found");
    return;
}
if (defined $container[4]) {
          $size = $container[4];
}

# pretty unlikely
elsif (defined $container[0] && defined $container[1] &&
       defined $container[2] && defined $container[3]) {
    error_window("gBootRoot: ERROR: No size specified");
    return;
}


 # kernel value can change without effecting initrd
 # no sense doing this until important stuff is filled in
 if (defined $kernel && defined $root_image &&
     defined $device && defined $size) {
     $container[5] = $compress;
 
     # 1 .. 4 - its a hash .. not too simple     
     !defined $lib_strip_check  ? ($container[6] = 1) 
       : ($container[6] = $lib_strip_check->get_active());
     !$container[6] ? ($container[6] = 2) : ($container[6] = 1);  
     !defined $bin_strip_check  ? ($container[7] = 3) 
       : ($container[7] = $bin_strip_check->get_active());
     !$container[7] ? ($container[7] = 4) : ($container[7] = 3); 
 
     if ($container[6] == 1) {     
        $obj_count == 0 ? ($container[8] = 5) : ($container[8] = 6);
     }

     if (!defined $entry_advanced[0]) {
        $container[9] = $device . "ea1"; 
	$entry_advanced[0] = $device;
     }
     else {
	 $container[9] = $entry_advanced[0] . "ea1";
     }

     # Works now .. whoosh!
     if ($container[10]) {
        if ($container[10] ne "") {
            $container[10] = $entry_advanced[1] if $entry_advanced[1];
        }
        if (defined $entry_advanced[1] and $entry_advanced[1] eq "") {
            $container[10] = "";
        }
        elsif ($container[10] eq "") {
           push(@original_container,$entry_advanced[1]);         
        }
     }
     else { 
           push(@original_container,$entry_advanced[1]) 
           if $entry_advanced[1];         
     }

     # pretty complex and works properly even for !-e lilo.conf
     if ($container[11]) {
        if ($container[11] ne "") {
            $container[11] = $entry_advanced[2] if $entry_advanced[2];
        }
        if (defined $entry_advanced[2] and $entry_advanced[2] eq "") {
            $container[11] = "";
        }
        elsif ($container[11] eq "") {
           push(@original_container,$entry_advanced[2]);         
        }
     }
     else { 
           push(@original_container,$entry_advanced[2]) 
           if $entry_advanced[2];         
      }

     if (@original_container) { # defined array deprecate Perl 5.6 -  zas@metaconcept.com
         # a hash check isn't perfect for two values which are the same
         # no need to check all the values

         my @temp_container = @container;

         # Got it! - how to deal with fields with no init value
         if (defined $container[10] and $container[10] eq "") {
	     $container[10] = $entry_advanced[1];
         }
         if (!defined $container[10]) {
	     $container[10] = $entry_advanced[1];
         }
         if (defined $container[11] and $container[11] eq "") {
	     $container[11] = $entry_advanced[2];
         }
         if (!defined $container[11]) {
	     $container[11] = $entry_advanced[2];
         }

         # no sense looking at undef values
         my (@temp_container2,@original_container2);
	 for (@temp_container) {
             if ($_) {
		 push(@temp_container2,$_);
             }       
         }
	 for (@original_container) {
             if ($_) {
		 push(@original_container2,$_);
             }       
         }

	 @temp_container = @temp_container2;
	 @original_container = @original_container2;

         splice(@temp_container,1,1);

         # A test which I've had to run too often
         #print "BEFORE @temp_container\nAFTER  @original_container\n";

         my %diff;
         grep($diff{$_}++,@temp_container);
         my @diff = grep(!$diff{$_},@original_container);

         if ($#diff >= 0) {
         # unlink initrd_image.gz, do initrd()
             $ok = 1;
             $initrd = "initrd_image";
         }
         else {
             $ok = 0;
         }
     }
     else {
         $ok = 2; # this is actually first (1 = diff, 0 = same)
         $initrd = "initrd_image";
     }

     # reset
     @original_container = ($container[0],$root_image,$device,$size,
                            $compress,$container[6],$container[7],
                            $container[8],$container[9],$container[10],
                            $container[11]);

     lilo();
 }

} # end sub submit

sub error_window {
    my ($error) = @_;

    if (not defined $error_window) {
    $error_window = new Gtk::Dialog;
    $error_window->signal_connect("destroy", \&destroy_window, \$error_window);
    $error_window->signal_connect("delete_event", \&destroy_window, \$error_window);
    $error_window->set_title("gBootRoot ERROR");
    $error_window->border_width(15);
    my $label = new Gtk::Label($error);
    $label->set_justify("left") if $_[1];
    $error_window->vbox->pack_start( $label, $true, $true, 15 );
    $label->show();
    my $button = new Gtk::Button("OK");
    $button->signal_connect("clicked", sub {destroy $error_window});
    $button->can_default(1);
    $error_window->action_area->pack_start($button, $false, $false,0);
    $button->grab_default;
    $button->show;
   }
     if (!visible $error_window) {
         show $error_window;
     }
     else {
        destroy $error_window;
     }

} # end sub error_window

sub errmk {
   error_window("gBootRoot: ERROR: Could not make important directories") if $? != 0;
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub errcp {
   error_window("gBootRoot: ERROR: Could not copy over important stuff") if $? != 0;
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub errum {
   error_window("gBootRoot: ERROR: Could not umount the device") if $? != 0;
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub errm {
   error_window("gBootRoot: ERROR: Could not mount device") if $? != 0;
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub errrm {
   error_window("gBootRoot: ERROR: Could not remove a directory or file")
                if $? != 0;
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub err {
   error_window("gBootRoot: ERROR: Not enough space after all") if ($? > 0);
   if (defined $error_window) {
       if ($error_window->visible) {
          return 2;
       }
   }
}

sub err_custom {

    if (defined $_[2]) {
         system("$_[0] > /dev/null 2>&1");
    }
    else {
     system("$_[0] >> $verbosefn 2>&1");
    }
    error_window($_[1]) if ($? != 0);
    if (defined $error_window) {
        if ($error_window->visible) {
           return 2;
        }
    }
}

sub err_custom_perl {

   if ((split(/ /, $_[0]))[0] eq "mkdir") {
      my $two = (split(/ /, $_[0]))[1];
      mkdir($two,0755); # Anyone allowed in
    }
    error_window($_[1]) if ($? != 0);
    if (defined $error_window) {
        if ($error_window->visible) {
           return 2;
        }
    }
}

sub lilo {

  # Do a little cleanup just in case
  system "rm $tmp/initrd_image.gz 2> /dev/null" if $ok == 1;
  system "umount $tmp/initrd_mnt 2> /dev/null";

  $kernel = $container[1];
  $root_image = $container[2];
  $device = $container[3];
  $size = $container[4];

  if ($ok == 1 || $ok == 2) {
    my $value = initrd($kernel,$root_image,$device,$size);
    mtab(0) if defined $value;
  }
  elsif ($ok == 0) {
    mtab(0);
  }

} # end sub lilo

sub lilo_put_it_together {

  my $B = "boot";
  # Time to do a little calculations
  my $device_size = (split(/\s+/,`df $mnt`))[8];
  my $boot_size = (stat($kernel))[12]/2 + (stat("$tmp/$initrd"))[12]/2;
  my $remain_boot = $device_size - $boot_size;
  pb($B,1);

  # A little output
  if ($remain_boot  =~ /^-+\d+$/) {
      error_window("gBootRoot: ERROR: Not enough room: boot stuff = $boot_size k, device = $device_size k");
      return;
  }
  else {
      $entry5->set_text("$remain_boot k");
  }

   # Better do this first
  #V#print "Copy over initrd ramdisk\n";
  return if err_custom("cp $tmp/$initrd $mnt/$initrd","gBootRoot: ERROR: Could not copy over initrd") == 2;
  pb($B,2);

  #V#print "Copying over kernel\n";
  return if
  err_custom("rm -rf $mnt/lost+found; cp $kernel $mnt/kernel",
               "gBootRoot: ERROR: Could not copy over the kernel") == 2;
  pb($B,3);

  #V#print "Making stuff for lilo\n";
  return if err(system "mkdir $mnt/{boot,dev} >> $verbosefn 2>&1; cp -a /dev/{null,fd?,hda1} $mnt/dev >> $verbosefn 2>&1") == 2;

  # Hopefully, this works, but have never tested it
  if ($device !~ m,/dev/fd\d{1}$,) {
     return if err(
     system "cp -a $device $mnt/dev >> $verbosefn 2>&1") == 2;
  }

  # This adds that next device
  ($norm_root_device) = gdkbirdaao();
  if (!-e "$mnt/dev/$norm_root_device") {
    return if err(
    system "cp -a /dev/$norm_root_device $mnt/dev >> $verbosefn 2>&1") == 2;
  }

  # For frame buffer devices and the like.
  if ($entry_advanced[1]) {
      return if errcp(system "cp -a $entry_advanced[1] $mnt/dev >> $verbosefn 2>&1") == 2;
  }

  #pb($B,3);
  #V#print "Copy over important lilo stuff\n";
  return if
  err_custom("cp /boot/boot.b $mnt/boot",
  "gBootRoot: ERROR: Not enough space or can't find /boot/boot.b") == 2;
  pb($B,4);
  # 3k sort of accounts for dev & dirs assuming dev is reasonable
  $remain_boot = $remain_boot - (stat("/boot/boot.b"))[12]/2  - 3;
  $entry5->set_text("$remain_boot k");

    # Write out the HEREDOCS
    open(LC, ">$mnt/brlilo.conf") or die "Couldn't write $mnt/brlilo.conf\n";
    print LC brlilo($device); close(LC);
    open(M, ">$mnt/message") or die "Couldn't write $mnt/message\n";
    print M message(); close(M);
    pb($B,5);
    $remain_boot = $remain_boot - ( (stat("$mnt/brlilo.conf"))[12]/2 +
                (stat("$mnt/message"))[12]/2 );
    $entry5->set_text("$remain_boot k");

  # Got to umount,mount, and umount again to make sure everything is
  # copied over before doing lilo
  return if errum(system "umount $mnt >> $verbosefn 2>&1") == 2;
  #V#print "Umount device\n";
  #V#print "Remount device\n";
  pb($B,6);
  return if errm(system "mount -t ext2 $entry_advanced[0] $mnt >> $verbosefn 2>&1") == 2;
  #V#print "Configuring lilo\n";
  pb($B,7);
  chdir("$mnt"); #"boot_root: ERROR: Could not change directories\n";
  if ($device eq $entry_advanced[0]) {
    if (err_custom("lilo -v -C brlilo.conf -r $mnt",
                   "gBootRoot: ERROR: lilo failed") == 2) {
        chdir($pwd); return;
    }
  }

  $remain_boot = $remain_boot - (stat("$mnt/boot/map"))[12]/2;
  $entry5->set_text("$remain_boot k");
  pb($B,8);

  chdir($pwd); # or die "boot_root: ERROR: Could not change directories\n";

  #V#print "Umounting $mnt\n";
  my $um = errum(system "umount $mnt >> $verbosefn 2>&1");
  pb($B,10);

  if ($ok == 1 || $ok == 2) {
   return if
   errrm(system "rmdir $tmp/initrd_mnt >> $verbosefn 2>&1") == 2;
  }

# Here's where we copy over that compressed filesystem
# We could separate $device = boot,root allowing two
# different devices to be used.
if ($um == 0 ) {
    mtab(1);
}
else {
    error_window("gBootRoot: ERROR: Boot disk was never umounted");
}  # copy over the compressed

} # end sub lilo_put_it_together

sub device2 {

  my $device_size = (split(/\s+/,`df $mnt`))[8];
  my $root_image_size = (stat($root_image))[12]/2;
  my $remain_root = $device_size - $root_image_size;

  if ($remain_root  =~ /^-+\d+$/) {
      error_window("gBootRoot: ERROR: Not enough room: root stuff = $root_image_size k, device = $device_size k");
  }
  else {
      $entry5->set_text("$remain_root k");
  }


     #V#print "Copy over the compressed filesystem\n";
     return if errrm(system "rmdir $mnt/lost+found >> $verbosefn 2>&1") == 2;
     my $broot_image = basename($root_image);

     my $FS = "filesystem";
     my $line_count = `wc -l < $root_image`; chomp $line_count;
     my $half_line_count = $line_count/2;
     my $count = 1;
     open(CF, ">$mnt/$broot_image") or error_window(
     "gBootRoot: ERROR: Could not copy over the root filesystem") and return;
     open(CR, "$root_image") or error_window(
     "gBootRoot: ERROR: Could not copy over the root filesystem") and return;
     while (<CR>) {
         print CF $_;
         pb($FS,$count,$line_count) if $count < $half_line_count;
         $count++;
     }
     close(CF); close(CR);

     return if
     err_custom("umount $mnt",
      "gBootRoot: ERROR: Root disk did not properly umount") == 2;
     pb($FS,$count,$line_count);
     #V#print "Finished!\n";

} # end sub device 2

# Checks if lib or bin is stripped, if not proceeds to strip.  Returns
# full file path and strip result.  Right now this is specific to initrd.
sub stripper {
    
    # stripper (program,bin|lib);
    if ((!defined $lib_strip_check && !defined $bin_strip_check) or
        ($lib_strip_check->active || $bin_strip_check->active)) {
    my $not_stripped = `file $_[0]`;
    my $filename = basename($_[0]);
   
     if ($not_stripped =~ m,not stripped,) {
	 if (($_[1] eq "lib" && !defined $lib_strip_check) or
             ($_[1] eq "lib" && $lib_strip_check->active)) {
             # --strip-all works for initrd
             if ($obj_count == 0) {
	           system "objcopy --strip-debug $_[0] $tmp/$filename"; 
	           return ( "$tmp/$filename", 1 );
             }
             elsif ($obj_count == 1) {
	           system "objcopy --strip-all $_[0] $tmp/$filename"; 
	           return ( "$tmp/$filename", 1 );
	     }
         }
         elsif (($_[1] eq "bin" && !defined $bin_strip_check) or
                ($_[1] eq "bin" && $bin_strip_check->active)) {
	     system "objcopy --strip-all $_[0] $tmp/$filename"; 
	     return ( "$tmp/$filename", 1 );
         }
     }
     else {
	 return ( $_[0], 0 );
     }
    }
    return ( $_[0], 0);

}

sub initrd_size {

  my ($linuxrc_size) = @_;
  my ($what,$lib);
  my ($path,$value);
  #V#print "Checking size needed for initrd\n";

  # the size of the loop device should be at least 1.63% larger than what
  # it will contain (i.e. 8192 inode), but to keep on the safe size it will
  #  be 2.00% larger.
  # 9 dirs  = 1024 each (increase if modified)
  # {ash,gzip,mount,umount} (required executables)
  # bzip2 if $compress eq bzip2 (optional)
  # 1 for ld.so.cache

  # change dir size if needed
  my $dir_size = 9 + 1;
  my $initrd_size = $dir_size + $linuxrc_size;

  # add other executables here
  my @initrd_stuff = qw(ash gzip mount umount);
  foreach (@initrd_stuff) {
     ($path,$value) = stripper("/bin/$_","bin");
     $initrd_size =  $initrd_size + ((stat($path))[12]/2);
     unlink($path) if $value == 1;
  }

  # path for bzip2 assumes too much
  if ($compress eq "bzip2" && -e "/usr/bin/$compress") {
     ($path,$value) = stripper("/usr/bin/$compress","bin");
     $initrd_size = $initrd_size + ((stat($path))[12]/2);
     unlink($path) if $value == 1;
  }

  # lib sizes
  # for testing purposes change $lib_place value
  open(L,"ldd /sbin/init|") or die "Oops, no init could be found :)\n"; # safe to use ldd
   while (<L>) {
      $lib = (split(/=>/,$_))[0];
      $lib =~ s/\s+//;
      $lib = basename($lib);
      $lib =~ s/\s+$//;
      open (SL,"ls -l /lib/$lib|") or die "humm: $!\n";
        while (<SL>) {
          # symbolic link
          if (-l "/lib/$lib") {
            $what = (split(/\s+/,$_))[10];
            $initrd_size = $initrd_size + 1;
	    ($path,$value) = stripper("/lib/$lib","lib");
            $initrd_size = $initrd_size + ((stat($path))[12]/2);
	    unlink($path) if $value == 1;
          }
          # no symbolic link
          else {
	    ($path,$value) = stripper("/lib/$lib","lib");
            $initrd_size = $initrd_size + ((stat($path))[12]/2);
	    unlink($path) if $value == 1;
          }
        }
   }

  $initrd_size = $initrd_size + ($initrd_size * 0.02);
  # For perfection 1 (rounded up) is o.k., but for safety 10 would be
  # better
  $initrd_size = sprintf("%.f",$initrd_size) + 10;
  return $initrd_size;

} # end sub initrd_size

sub pb {

    # Will have to count by hand
    if ($_[0] eq "initrd") {
        $pbar->configure( 10, 0, 10 );
    }
    elsif ($_[0] eq "boot") {
        $pbar->configure( 10, 0, 10 );
    }
    elsif ($_[0] eq "filesystem") {
        $pbar->configure($_[2], 0, $_[2]);
    }

    $pbar->set_value($_[1]);
    # Found this at Gnome ..
    # http://www.uk.gnome.org/mailing-lists/archives/gtk-list/
    # 1999-October/0401.shtml
    # Also, http://www.gtk.org/faq/  5.14
    while (Gtk->events_pending) { Gtk->main_iteration; }

}

sub initrd {

    my($kernel,$root_image,$device,$size) = @_;
    my($lib,$what,$path,$value,$tool);
    my $I = "initrd";

  my $broot_image = basename($root_image);
  open(LC, ">$tmp/linuxrc") or die "Couldn't write linuxrc to loop device\n";
  print LC initrd_heredoc($broot_image); close(LC);
  pb($I,1);
  my $size_needed = initrd_size((stat("$tmp/linuxrc"))[12]/2);
  unlink("$tmp/linuxrc");

  #print V "Using loop device to make initrd\n";
  #V#print V "Make sure you have loop device capability in your running kernel\n";
  system "dd if=/dev/zero of=$tmp/$initrd bs=1024 count=$size_needed >> $verbosefn 2>&1";
  pb($I,2);
  # no need to enter y every time
  open(T,"|mke2fs -m0 -i8192 $tmp/$initrd >> $verbosefn 2>&1") or die "Problem here: $!\n";  print T "y\n"; close(T);
  pb($I,3);
  #V#print V "Mounting initrd in tmp\n";

return if errmk(system "mkdir $tmp/initrd_mnt >> $verbosefn 2>&1; mount -o loop -t ext2 $tmp/$initrd $tmp/initrd_mnt >> $verbosefn 2>&1") == 2;
  pb($I,4);

  #V#print "Putting everything together\n";
  open(LC, ">$tmp/initrd_mnt/linuxrc") or die "Couldn't write linuxrc to loop device\n";
  print LC initrd_heredoc($broot_image); close(LC);
  # I could test this but somebody's system may do permissions differently
  system "chmod 755 $tmp/initrd_mnt/linuxrc >> $verbosefn 2>&1";
  system "rmdir $tmp/initrd_mnt/lost+found >> $verbosefn 2>&1";
  pb($I,5);

  #V#print "... the dirs\n";
  return if errmk(system "mkdir $tmp/initrd_mnt/{bin,dev,etc,lib,mnt,proc,sbin,usr} >> $verbosefn 2>&1; mkdir $tmp/initrd_mnt/usr/lib >> $verbosefn 2>&1") == 2;
  pb($I,6);

  return if errcp(system "cp -a /dev/{console,null,ram0,ram1,tty0} $tmp/initrd_mnt/dev >> $verbosefn 2>&1") == 2;
  return if errcp(system "cp -a $device $tmp/initrd_mnt/dev >> $verbosefn 2>&1") == 2;
  pb($I,7);

  #V#print ".. the bins\n";
  my @initrd_stuff = qw(ash gzip mount umount);
  foreach (@initrd_stuff) {
     ($path,$value) = stripper("/bin/$_","bin");
     $value == 0 ? ($tool = "cp -a") : ($tool = "mv"); 
     return if errcp(system "$tool $path $tmp/initrd_mnt/bin >> $verbosefn 2>&1") == 2;
  }

  # path for bzip2 assumes too much
  if ($compress eq "bzip2" && -e "/usr/bin/$compress") {
     ($path,$value) = stripper("/usr/bin/$compress","bin");
     $value == 0 ? ($tool = "cp -a") : ($tool = "mv"); 
     return if errcp(system "$tool $path $tmp/initrd_mnt/bin >> $verbosefn 2>&1") == 2;
  }

  # Testing init is sufficient for grabbing the correct libraries for the
  # executables immediately above.  This could be modified to test a
  # list of executables.
  #V#print ".. the libs\n";
  open(L,"ldd /sbin/init|") or die "Oops, no init could be found :)\n"; # safe to use ldd
   while (<L>) {
      $lib = (split(/=>/,$_))[0];
      $lib =~ s/\s+//;
      $lib = basename($lib);
      $lib =~ s/\s+$//;
      open (SL,"ls -l /lib/$lib|") or die "humm: $!\n";
        while (<SL>) {
          # symbolic link
          if (-l "/lib/$lib") {
            $what = (split(/\s+/,$_))[10];
            ($path,$value) = stripper("/lib/$lib","lib");
            $value == 0 ? ($tool = "cp -a") : ($tool = "mv"); 
            return if errcp(system "$tool $path $tmp/initrd_mnt/lib >> $verbosefn 2>&1") == 2;
	    ($path,$value) = stripper("/lib/$what","lib");
	    $value == 0 ? ($tool = "cp -a") : ($tool = "mv"); 
            return if errcp(system "$tool $path $tmp/initrd_mnt/lib >> $verbosefn 2>&1") == 2;
          }
          # no symbolic link
          else {
	    ($path,$value) = stripper("/lib/$lib","lib");
            return if errcp(system "cp -a $path $tmp/initrd_mnt/lib >> $verbosefn 2>&1") == 2;
          }
        }
   }


  #V#print "Determine run-time link bindings\n";
  # Has a return code of 0 regardless
  system "ldconfig -r $tmp/initrd_mnt";
  #V#print "Umounting loop device, and compressing initrd";
  return if errum(system "umount $tmp/initrd_mnt >> $verbosefn 2>&1") == 2;
  system "gzip -f9 $tmp/$initrd >> $verbosefn 2>&1";
  pb($I,10); # This takes the longest.

  $initrd = $initrd . ".gz";


} # end sub initrd

# This was submitted by Cristian "cretzu."
sub gdkbirdaao
{
  # Guess Default Kernel Boot Image Root Device And Append Options (gdbirdaao)
  #
  # We return a list with 3 elements:
  #
  #   root device, kernel boot image path and append options
  #
  # The last list element (append options) could be returned as a list
  # of options, but it probably might be cleaner if the caller splitted it.
  #
  # this should cover the following cases:
  #
  # 1. we have a 'root=...' somewhere above the 'image=...' block(s), and
  #    the image block may or may not have a root specified
  #
  # 2. there is no default label, in which case, we take the first one
  #
  # 3. there is a default label, and that's what we pick up
  #

  my $ret_image_path = '';
  my $ret_root_dev = '';
  my $ret_append = '';

  if (-e $lilo_conf and !-d $lilo_conf)
  {
    open(LIL, $lilo_conf) or die "*** $lilo_conf not found,";
    my @lilo_lines = <LIL>;
    close(LIL);
    chomp(@lilo_lines);

    my $default_label = '';
    my %image_blocks;
    my $image_block_name_prefix = 'ImageBlock';
    my $image_block_no = 1;
    my $image_block_name = '';
    my $root_dev = '';

    for (@lilo_lines)
    {
      # ignore comment lines
      next if m/^\s*[#]/;

      # cleanup whitespace
      s/\s*//;
      s/\s*$//;
      s/\s*=\s*/=/;

      # 'default=whatever' returns just a label
      if (m/default=(.+)\s*/)
      {
        $default_label = $1;
      }
      # start of a new 'image=<kernel path>' image block or similar
      elsif (m/(image|other)=(.+)\s*/)
      {
        $image_block_name = sprintf("%s%02d",
                                    $image_block_name_prefix,
                                    $image_block_no);
        $image_blocks{$image_block_name}{'kernel_image_path'} = $2;
        $image_blocks{$image_block_name}{'root_device'} = $root_dev;
        $image_block_no += 1;
      }
      # image block label
      elsif (m/label=(.+)\s*/)
      {
        $image_blocks{$image_block_name}{'block_label'} = $1;
      }
      # 'root=<root device>'
      elsif (m#root=/dev/(.+)\s*#)
      {
        # inside an image block
        if ($image_block_name and
            defined($image_blocks{$image_block_name}{'root_device'}))
        {
          $image_blocks{$image_block_name}{'root_device'} = $1;
        }
        # loose
        else
        {
          $root_dev = $1 if !$root_dev;
        }
      }
      elsif (m#append=\"(.+)\"#)
      {
	$image_blocks{$image_block_name}{'append'} = $1;
      }
      else
      {
        # Ignore everything else
      }
    }

    # we'll now find the kernel image and root device
    foreach $image_block_name (sort keys %image_blocks)
    {
      # Assume there's no specified default label; take the first
      $ret_root_dev = $image_blocks{$image_block_name}{'root_device'}
        if !$ret_root_dev;
      $ret_image_path = $image_blocks{$image_block_name}{'kernel_image_path'}
	if !$ret_image_path;
      $ret_append = $image_blocks{$image_block_name}{'append'}
	if !$ret_append;

      # do we have a default kernel?
      if ($image_blocks{$image_block_name}{'block_label'} eq $default_label)
      {
        # Found the block match for the default label
        $ret_root_dev = $image_blocks{$image_block_name}{'root_device'};
        $ret_image_path = $image_blocks{$image_block_name}{'kernel_image_path'};
	$ret_append = $image_blocks{$image_block_name}{'append'};
        last;
      }
    }
  }
  
  # and some a small portion of paranoia
  $ret_root_dev = 'hda1' if !$ret_root_dev;

  return ($ret_root_dev, $ret_image_path, $ret_append);

} # end sub gdkbirdaao

sub mtab_window {
# Will just use a dialog box.
    my ($dialog,$error,$count,$pattern) = @_;

    if (not defined $mtab) {
    $mtab = new Gtk::Dialog;
    $mtab->signal_connect("destroy", \&destroy_window, \$mtab);
    $mtab->signal_connect("delete_event", \&destroy_window, \$mtab);
    $mtab->set_title("gBootRoot: Device check");
    $mtab->border_width(15);
    $mtab->set_position('center');
    my $label = new Gtk::Label($dialog);
    $label->set_justify( 'left' );
    $label->set_pattern("_________") if defined $pattern;
    $mtab->vbox->pack_start( $label, $true, $true, 15 );
    $label->show();
    my $button = new Gtk::Button("OK");
    $button->signal_connect("clicked", \&mtab_check, $count);
    $button->can_default(1);
    $mtab->action_area->pack_start($button, $false, $false,0);
    $button->grab_default;
    $button->show;
    $button = new Gtk::Button("Cancel");
    $button->signal_connect("clicked", sub { destroy $mtab} );
    $mtab->action_area->pack_start($button, $false, $false,0);
    $button->show;
    }
     if (!visible $mtab) {
         show $mtab;
     }
     else {
        destroy $mtab;
        mtab_window($dialog,$error,$count) if $error == 0;
     }

} # end sub mtab_window

sub mtab{

# /proc/mount could be used, but maybe there is no /proc
# Press OK when drive and storage medium are ready.  The drive should not
# be mounted.

  if ($_[0] == 0) {
    my $dialog = "BOOTDISK:\n"
             ."Press OK when the drive and its storage medium is ready.\n"
             ."The Boot Disk will now be made.  All data already on\n"
                 ."the storage medium will be erased.";
    mtab_window($dialog,1,$_[0],1);
  }
  elsif ($_[0] == 1) {
    my $dialog = "ROOTDISK:\n"
             ."Press OK when the drive and its storage medium is ready.\n"
             ."The Root Disk will now be made.  All data already on\n"
                 ."the storage medium will be erased.";
    mtab_window($dialog,1,$_[0],1);
  }


} # end sub mtab


sub mtab_check {

    my($widget,$count) = @_;

    my $dialog;
    my $error = 1;

# Check to see if $device is mounted
open (MTAB, "/etc/mtab") or die "no mtab!\n";
while (<MTAB>) {
    if (m,$entry_advanced[0],) {
        # Safety Check:
       $dialog = "Please umount the device first.\nPress OK when you are ready.";
       $error = 0;
    }
}
close(MTAB);

mtab_window($dialog,$error,$count) if $error == 0;

  # Make sure the drive and storage medium are accessible
  # Keep asking until they are.
  if ($error == 1) {
   destroy $mtab;
   system "mke2fs -m0 -i8192 $entry_advanced[0] $size >> $verbosefn 2>&1";
   if ($? != 0) {
    $dialog = "gBootRoot: ERROR: You need to insert a disk\n";
     mtab_window($dialog,$error,$count);
     return;
   }
   return if errm(system "mount -t ext2  $entry_advanced[0] $mnt >> $verbosefn 2>&1") == 2;
   lilo_put_it_together() if $count == 0;
   device2() if $count == 1;
  }

} # end sub mtab_check


sub initrd_heredoc {

    my($broot_image) = @_;

# Here's where the initrd is put together using a loop device
# HEREDOC
my $initrd_exec = << "INITRD";
#!/bin/ash

export PATH=/bin:/sbin:/usr/bin:

echo Preparing to setup ramdisk.

mount -o remount,rw / 2>/dev/null

echo Mounting proc...
mount -t proc none /proc

echo -n 'Please insert the root floppy, and press [Enter]: '
read ENTER

echo Mounting $device readonly ...
mount -o ro -t ext2 $device /mnt

echo -n Copying new root to ramdisk .. please wait ...
$compress -cd /mnt/$broot_image > /dev/ram1
echo done.

echo -n Unmounting $device ...
umount /mnt
echo done.

echo Changing to the new root.
echo 257 >/proc/sys/kernel/real-root-dev

echo -n Unmounting proc ...
umount /proc
echo done.

echo Continuing normal boot procedure from ramdisk.
INITRD

    return $initrd_exec;

} # end sub initrd_heredoc


sub brlilo {

    my ($device) = @_;
    $entry_advanced[2] ? $entry_advanced[2] = $entry_advanced[2] 
                       : $entry_advanced[2] = $container[11];

# HEREDOC
my $brlilo = << "LILOCONF";
boot = $device
message = message
delay = 50
vga = normal
install = /boot/boot.b
map = /boot/map
backup = /dev/null
compact

# bootdisk
image = kernel
append = "load_ramdisk = 1 debug $entry_advanced[2]"
initrd = $initrd
root = $device
label = bootdisk
read-write

# normalboot
image = kernel
append = "$entry_advanced[2]"
root = /dev/$norm_root_device
label = normalboot
read-only
LILOCONF

    return $brlilo;

} # end sub brlilo


sub message {
# HEREDOC
my $message = << "MESSAGE";

gBootRoot $version $date GNU GPL
mailto:  Jonathan Rosenbaum <mttrader\@access.mountain.net>

Press [Ctrl] to see the lilo prompt.

Press [Tab] to see a list of boot options.

bootdisk   = This will boot a compressed root filesystem
             on another floppy.
normalboot = This will boot up a specified filesystem.
             default: /dev/$norm_root_device
             Use root=/dev/(h or s)dXX
                                 h = IDE Drive
                                 s = SCSI Drive

Trouble:  Do not forget boot: option single
Fix a filesystem:  e2fsck /dev/(h or s)dXX
Bad superblock:    e2fsck -b 8192 /dev/(h or s)dXX

MESSAGE

    return $message;

} # end sub message

sub help {

<< "HELP";

gBootRoot $version $date GNU GPL
email contact -> Jonathan Rosenbaum <mttrader\@access.mountain.net>
Homepage -> http://the.netpedia.net/gBootRoot.html
Submit a Bug -> http://sourceforge.net/bugs/?group_id=9513
Development site -> http://sourceforge.net/projects/gbootroot
Help forum -> http://sourceforge.net/forum/forum.php?forum_id=29639
Open forum -> http://sourceforge.net/forum/forum.php?forum_id=29638
gbootroot-devel mailing list -> http://sourceforge.net/mail/?group_id=9513

gBootRoot is a Gtk+/Perl program useful for both beginners and advanced
GNU/Linux users.  It makes the construction/development of emergency and
mini distributions simple.

- A GNU/Linux user can easily create an emergency Boot/Root set.
  There are a multitude of pre-existing compressed filesystems readily
  available.  Please check the gBootRoot FAQ at the gBootRoot site
  listed above.

** If you are a developer please send me links to Kernel/Filesystems
   which I can share with users of gBootRoot.

- A developer creating a mini distribution can concentrate his efforts
  on perfecting the filesystem, and then he can use gBootRoot to
  quickly create a Boot/Root set to run tests.

- Disk sets allow for more space to include interesting and necessary
  things.  The size of the Kernel is increasing every day making sets
  advantageous.


How to Use gBootRoot:

The most important button to familiarize yourself with is the Submit button 
which starts the whole process; dialogs are presented as the process 
continues asking you if you want to continue "OK" or stop "Cancel".

The first row has only one choice "lilo."  Clicking on the menu on the right 
selects the boot method.

The second row allows you to select the kernel for the Boot/Root set.  You
may either use the file selector button on the right hand side, or you may
type in the location on the left hand side.

The third row allows you to select the compressed filesystem you are
providing, using either of the two ways mentioned before.

The fourth row allows you to select the device you want to use.  The default
device is the first floppy disk (/dev/fd0).

The fifth row allows you to choose the size of the device being used.  The
default size is 1722 which works fine with 1440 floppy drives. Click on the 
appropriate radio button to choose either gzip or bzip2 compression if the 
program doesn't automatically detect it.

Advanced Section:

"Stripping"  On by default for libraries and binaries.  The stripping 
behavior for libraries may be changed by clicking on the right mouse button 
to change from --strip-debug to --strip-all.

"Devel Device"  If the device used for development is different than the 
actual boot device, use this field to indicate that device.  You will have to 
run lilo -v -C brlilo.conf -r "device mount point" manually at a later time 
on the actual boot device.

"Opt. Device"  Add devices to the boot disk which are necessary for the
kernel to function properly.  Put a space between each device.  For instance,
/dev/fb0 for frame buffer devices.

"append ="  Add append options to brlilo.conf.  If you are using a frame
buffer device you could add something like video=matrox:vesa:402,depth:16.

Little things you may want to know:

* gBootRoot requires ash for initrd.  Ash is a feather weight version of Bash.

HELP

}