gBootRoot pronounced "bOOtrOOt"
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

320 lines
9.5 KiB

# $Id: Example.yard,v 1.15 2001/12/13 03:02:18 freesource Exp $
# Example.yard
#
# Creates a minimalistic multi-user runlevel root filesystem with getty.
# Tested on Debian unstable/testing, but should work on other distributions
# (Mandrake, RedHat, Slackware, etc.) by using the proper inittab and getty.
#
# Create either as a normal user or root.
#
# Works both with and without devfs, i.e devfs=nomount, assuming the correct
# replacement inittab is used. In order to create a non-devfs from a host
# system using devfs, either manually mknod /dev/tty[0-2] (major 4 minor 0-2)
# or have devfsd automatically make these devices every time the root
# filesystem starts.
#############################################################################
#
# Format rules:
# - Lines beginning with # or % are comments.
#
# - Blank lines and whitespace are ignored.
#
# - Lines of the form "filename1 -> filename2" will create symbolic (soft)
# links on the root fs. For example, if you want sh linked to ash
# in the root fs you could specify: "/bin/sh -> /bin/ash".
# The literal output from the last column found when using `ls -s`
# may be used, or fictional links may be created, for instance,
# ashsa -> bash (In this case if /bin/bash exists on the system the link
# would be /bin/ashsa -> /bin/bash, otherwise /asha -> /bash)
# (There is no way to specify hardlinks, though hard linked files
# that exist on the hard disk will be hard linked.)
#
# - Lines of the form "filename1 <= Replacements/pathto_filename2"
# will cause filename2 to be copied to filename1 on the root fs.
# This is useful for specifying trimmed-down replacements for
# /etc/passwd, /etc/inittab, etc. For the above example, filename2
# is found in its real path below the Replacements directory which is
# found in the default Replacements path of $HOME/yard/Replacements.
# Replacements may be specified in their absolute or relative paths
# (found using $PATH).
#
# - User defined paths may be specified in the Path Box
# (Edit->Settings->Path). These paths may be used to search for the
# relative paths for Replacements, links and files.
#
# - Glob designations (?, * and []) are generally allowed, eg /dev/hd[ab]*
# Wildcards are not allowed in link specs or replacement specs.
#
# - The $RELEASE variable which may be used to locate the modules directory
# can come from one of three sources, the kernel version returned from a
# selected kernel in the main section,
# a user defined kernel version in the ABS, or the value of `uname -r`
# returned automatically when the other two sources aren't specified.
#
# You don't need to specify shared libraries or loaders because
# necessary libraries are detected automatically.
# You may choose between two behaviors for the treatment of NSS and PAM
# libraries. The old Yard behavior assumes that only the user knows which
# service modules they want to include in the file set, and tests
# (see Tests menu) may be run on the configuration files to show what isn't
# provided, so that the user can include the missing modules manually by
# editing the template, but the user still needs to figure out any
# dependencies since the modules are dynamically loaded.
#
# The new Yard behavior (default) assumes that the user does know what they
# want based on what the user puts in the NSS (nsswitch.conf) and PAM
# (pam.conf or pam.d/*) configuration files. The configuration files are
# then parsed and the corresponding service modules are included in the
# file set if they exist on the host system, tests (see Tests menu) can be
# run to find out which ones don't exist. The service modules are checked
# for library dependencies. What this means is that the user only needs
# to specify the configuration files in the template, and doesn't need to
# be concerned with the service modules or libraries involved. The new
# behavior is recommended, and won't effect the file set even if the
# requirements are already included in the template. If desired, the old
# behavior may be regained by switching off Edit->Settings->"NSS Conf"
# and Edit->Settings->"PAM Conf".
#
# You don't need to explicitly specify intermediate directories unless you
# just want to make sure they exist.
#
##############################################################################
# init - parent of all processes
# Choose an inittab farther below in the page.
/sbin/init
telinit
/sbin/shutdown
/sbin/halt
/etc/init.d/halt <= Replacements/etc/init.d/halt.example
/sbin/reboot
/etc/init.d/reboot <= Replacements/etc/init.d/reboot.example
/etc/init.d/rc <= Replacements/etc/init.d/rc.example
/etc/init.d/rcS <= Replacements/etc/init.d/rcS.example
/sbin/swapon
# Login stuff
/bin/login
/sbin/sulogin
/etc/securetty <= Replacements/etc/securetty.example
/root/.bashrc <= Replacements/root/.bashrc.debian
/root/.profile <= Replacements/root/.profile.debian
/home/user/.bashrc <= Replacements/home/user/.bashrc.debian
/home/user/.bash_profile <= Replacements/home/user/.bash_profile.debian
/etc/hostname <= Replacements/etc/hostname
/etc/motd <= Replacements/etc/motd
# login and mount stuff
#
/etc/fstab <= Replacements/etc/fstab.example
#
/etc/issue # nice to have
#
# No password for root or user.
/etc/group <= Replacements/etc/group.example
/etc/passwd <= Replacements/etc/passwd.example
#
# Shadow password root=root user=user
#/etc/group <= Replacements/etc/group.debian
#/etc/passwd <= Replacements/etc/passwd.debian
#/etc/shadow <= Replacements/etc/shadow.debian
/etc/login.defs
# Specify these binaries absolutely because some boot scripts may
# need them to be here.
/bin/echo
/bin/mount
/bin/umount
/bin/cat
/bin/hostname
/bin/ln
/bin/ls
/bin/more
/bin/mv
/usr/bin/find
##### SHELLS
#
/bin/sh -> bash
/bin/sash
#
/etc/profile
/etc/shells # Make sure all included shells are listed.
# PROVISIONS FOR PAM:
/etc/pam.d/other
/etc/pam.d/login
# /etc/pam.conf
# PROVISIONS FOR NSS
# If you use the old libc5, or uClibc you don't need this.
# Comment out this line.
#
/etc/nsswitch.conf <= Replacements/etc/nsswitch.conf.example
##### INITTAB and GETTY
# These inittab and getty pairs are based on major distributions.
# If your distribution isn't mentioned here, one of these inittabs may
# still work. Check your /etc/inittab to confirm, or create a new inittab
# replacement and edit as required. Some gettys require /etc/gettydefs.
#
# Choose the *-nodevfs version if you don't want to use the device fs
# (devfs=nomount)
#
#===== DEBIAN uses a program called "getty" which is actually agetty in
#===== disguise:
/etc/inittab <= Replacements/etc/inittab.example-deb
#/etc/inittab <= Replacements/etc/inittab.example-deb-nodevfs
/sbin/getty
#
#===== MANDRAKE, REDHAT and many other modern RH based DISTS use mingetty:
#/etc/inittab <= Replacements/etc/inittab.example.mingetty-rpm
#/etc/inittab <= Replacements/etc/inittab.example.mingetty-rpm-nodevfs
#/sbin/mingetty
#/etc/gettydefs
#
#===== SLACKWARE uses agetty:
#/etc/inittab <= Replacements/etc/inittab.example.agetty-slack
#/etc/inittab <= Replacements/etc/inittab.example.agetty-slack-nodevfs
#/sbin/agetty
#/etc/gettydefs
# Devices - If devfs isn't desired use the kernel option devfs=nomount
/dev/console
/dev/null
/dev/zero
/dev/tty[0-2]
#
/dev/mem
/dev/kmem
/dev/port
/dev/random
/dev/urandom
/dev/ram[0-2]
/dev/loop[0-2]
/dev/fd0
##### utmp and wtmp (Made by rcS if they don't exist.)
# Utilities which use them.
w
last
##### terminfo entries for programs which need terminal capabilities like
##### vi and nano.
/usr/share/terminfo/v/vt100
/usr/share/terminfo/l/linux
# The old way
#/etc/termcap <= Replacements/etc/termcap
reset
# Designate a keyboard map of choice if you want to load one for
# the text console. Edit rcS to point to it.
# /usr/share/keymaps/i386/qwerty/defkeymap.kmap.gz
# /usr/lib/kbd/keymaps/i386/qwerty/defkeymap.kmap.gz
##### Empty directories
/dev
/proc
/tmp
/var/tmp
/var/log
/var/run
##### Special links
/etc/mtab -> /proc/mounts
##### MODULES and support programs for them.
insmod
rmmod
lsmod
depmod
modprobe
/etc/modules.conf
#
# Modules from your host system.
# Select the ones required.
#
#/lib/modules/$RELEASE/*
#
# User-Mode-Linux modules
#
# These are modules compiled for the uml kernel version
# included with gbootroot. Choose 2.2 or 2.4 depending on
# which kernel series your are using with your live host system.
# You may either include the modules archive with the root
# filesystem as a replacement and "tar xvf", or untar the
# modules archive from the host system by mounting it
# with "mount -t hostfs none -o \
# /usr/lib/bootroot/yard/Replacements/lib/modules /mnt"
# and then "tar xvf /mnt/modules-2.4.tar -C /".
#
# Then "depmod -ae -F /proc/ksyms" from the running uml kernel.
#
#
#/modules-2.2.tar <= Replacements/lib/modules/modules-2.2.tar
#/modules-2.4.tar <= Replacements/lib/modules/modules-2.4.tar
##### SYSTEM UTILITIES
chmod
chown
chroot
cp
df
id
mkdir
pwd
rm
stty
sync
uname
which
ldd
du
rmdir
less
dircolors
grep
tail
mknod
ps
touch
whoami
diff
wc
date
dmesg
tar
# Editors
vi
# Small, free, pico replacement.
nano
##### DISK AND FILE SYSTEM UTILITIES
fdisk
#
# ext2 stuff
# ----------
e2fsck
mke2fs
tune2fs
dumpe2fs
debugfs
e2image
badblocks
#
# reiserfs stuff
# -------------
#mkreiserfs
#reiserfsck
#debugreiserfs
#unpack
#resize_reiserfs