mirror of
				https://github.com/fspc/gbootroot.git
				synced 2025-11-04 08:15:36 -05:00 
			
		
		
		
	
		
			
				
	
	
		
			67 lines
		
	
	
		
			1.7 KiB
		
	
	
	
		
			Plaintext
		
	
	
		
			Executable File
		
	
	
	
	
			
		
		
	
	
			67 lines
		
	
	
		
			1.7 KiB
		
	
	
	
		
			Plaintext
		
	
	
		
			Executable File
		
	
	
	
	
Setting up the root filesystem
 | 
						|
-----------------------------
 | 
						|
 | 
						|
1. Run setup in this directory: 
 | 
						|
 | 
						|
. setup
 | 
						|
 | 
						|
Setting up a Swap File
 | 
						|
----------------------
 | 
						|
 | 
						|
1. Run make_swapfile in this directory:
 | 
						|
 | 
						|
. make_swapfile
 | 
						|
 | 
						|
 | 
						|
Getting X working
 | 
						|
-----------------
 | 
						|
 | 
						|
1. To get X11 working you will need to get your network up.  The instructions
 | 
						|
below assume your host (the computer you are running) has an ip of 192.168.1.4,
 | 
						|
a uml ip of 192.168.1.2 and a tap device ip of 192.168.1.5.
 | 
						|
 | 
						|
2. If you haven't already done this, you will want to edit the 
 | 
						|
/etc/network/interfaces file using vi.  This should be self-explanatory.
 | 
						|
 | 
						|
3. Load any modules required by your host system.  If you decide to use 
 | 
						|
tap, do this: 
 | 
						|
 | 
						|
modprobe ethertap
 | 
						|
modprobe netlink_dev
 | 
						|
 | 
						|
4. Configure the device on your host system.  Here the tap device is being
 | 
						|
set to 192.168.1.5 and then routed to the host 192.168.1.4:
 | 
						|
 | 
						|
ifconfig tap0 192.168.1.5
 | 
						|
route add -host 192.168.1.4 gw 192.168.1.5
 | 
						|
 | 
						|
5. The next time you start the uml kernel and boot the root_fs you will want 
 | 
						|
to give it options like this where  HWaddr (see ifconfig) belongs to your 
 | 
						|
network device:
 | 
						|
 | 
						|
ubd0=/root_fs_debian_x11 root=/dev/ubd0 eth0=ethertap,tap0,HWaddr,192.168.1.5 mem=64M
 | 
						|
 | 
						|
Hint: An easier way to do this would be to use the UML box in gbootroot from
 | 
						|
your host computer.  No ..  uml doesn't work within uml. :)
 | 
						|
 | 
						|
6. At this point you should be able to ping 192.168.1.4.
 | 
						|
 | 
						|
Hint: Check to make sure that uml_net came bundled with the uml kernel,
 | 
						|
because this is what enables networking.
 | 
						|
 | 
						|
6.  Run startx.  It will ask for your host ip number.
 | 
						|
 | 
						|
That's it.  
 | 
						|
 | 
						|
Links:
 | 
						|
user-mode-linux.sourceforge.net
 | 
						|
 | 
						|
Hints:
 | 
						|
Mount the host fs:  mount -t hostfs none /mnt
 | 
						|
		    mount -t hostfs none -o /home /mnt
 | 
						|
 | 
						|
Jonathan Rosenbaum
 | 
						|
freeesource@users.sourceforge.net
 | 
						|
 | 
						|
 |