gbootroot

Author	SHA1	Message	Date
freesource	c7f6af4af5	This takes care of a problem when links were specified which didn't actually exist, or had no / appended .. basically dirname turned into "." which created a directory apart from the loopback dir. Fixed in make_link_absolute.	23 years ago
freesource	9d2ffa3a89	Added Esc close capability for save as.	23 years ago
freesource	3c073ca3dd	Old code which was automatically finding a ld loader regardless of the users own wishes has been consigned to a function call auto_loader which will not be used because this gets away in creating dists with alternative libs, and ld is almost always found if required binaries are chosen, anyways.	23 years ago
freesource	830467df85	This removes -i8192 from genext2fs default, this just causes problems, the defaults built into genext2fs work alot better.	23 years ago
freesource	c3d1b82e40	If a replacement is found to be a file in an absolute location it is used.	23 years ago
freesource	8223d83b88	This adds more improvements to New Template, allowing a template of the same name to be written over as a blank file, and puts a blank entry .. if the user attempts to write to the blank entry, the dialog will ask if they want to save the original template.	23 years ago
freesource	0867ee47fb	This adds the New Template function.	23 years ago
freesource	39adac66a8	This closes the save_as box when Esc is pressed, and associated New Template with 103.	23 years ago
freesource	9658bc3c9c	This tells exactly what is happening during PASS 2 as determined by the user.	23 years ago
freesource	f32ff9594c	This returns the logic back to the original default for pam by not checking for lib deps for pam service modules when PAM Config is off.	23 years ago
freesource	b883f0e687	Covered a mount umount routine with ne genext2f in tests, and removed some unecessary verbosity which was basically just a repeat of itself.	23 years ago
freesource	eeb7a7a56d	Added the size output for replacements, this was being skipped because of a next loop.	23 years ago
freesource	1791729abd	This completes the NSS PAM interface, they both can be turned off or on via the Yard Box now.	23 years ago
freesource	ff44ae48f5	This adds "New Template Alt-N" and "NSS Config & PAM Config" to the Yard Box.	23 years ago
freesource	4f7fbda058	Fixes a bug where libc was being tested in the mount directory rather than /lib, and undefs %pam_repeats. This allows multiple invocations to work properly.	23 years ago
freesource	5691d3ca77	Now it works really nicely, automatically gets the proper libraries for pam and nss using their configurations files.	23 years ago
freesource	81ee541252	This adds pam service modules to %Included and cleans up verbosity.	23 years ago
freesource	df476a38e8	Prettifies the nss thing, and removes uneccessary code.	23 years ago
freesource	373fc2de40	This is hardwired now, but it parses nsswitch.conf and adds all the service modules found in PASS 2 when links are checked for. This involves adding and extra foreach loop.	23 years ago
freesource	74e5270f06	$ENV{RELEASE} is now initialized every time a check is run on the template. Information can come from three sources, the kernel version returned from a selected kernel in the main section, the user defined kernel version in the ABS, or `uname -r`. User defined kernel version overrides the kernel. The root_fs needs to be built in relation to the actual kernel modules it will run on. Previously the $RELEASE value wasn't returned properly because of some bugs in kernel_version_check. This has been fixed.	23 years ago
freesource	f256edcc87	Fixed nss test so that it checks for the right libnss_(service).so.$version if glibc 2.2 is used. Glibc 2.0 and 2.1 used 1 and 2 respectively, but 2.2 uses 2.	23 years ago
freesource	04354d29d3	The proper ldd check is now used if a dynamically linked binary is detected to require uClibc rather than libc6. The ldd from the default location of /usr/i386-linux-uclibc/bin is used for uClibc.	23 years ago
freesource	dab981e68f	Fixed pam test so that the 3rd field rather than the 4th field is being checked in the service-name files found in /etc/pam.d/. The 4th field is acceptable for pam.conf. If a path is specified in either conf format, that path will be checked, otherwise, either the pam default path of /usr/lib/security or the FSSTD location /lib/security will be checked for a match.	23 years ago
freesource	1501d365e3	Fixed nss test so that it checks for the right libnss_(function).so.$version. The old versioning for libnss no longer applies.	23 years ago
freesource	97bc60ea6c	Had ldd set to the busybox type.	23 years ago
freesource	d1cd32b44d	Only gives $mtab a value on cancel if it is a bootloader check.	23 years ago
freesource	306cbc8cd0	Turned off the busybox test.	23 years ago
freesource	44a5828e82	This solves the problem of extra devices in boot_device_table.txt	23 years ago
freesource	f4d63b90d9	This does a great job of prompting the user if they have root privileges for lilo, they may continue or stop the process. This uses mtab().	23 years ago
freesource	a9c5a6d0b8	The latest and greatest user-mode-linux: 2.2.15	23 years ago
freesource	e507aa375e	This almost creates a successful normal user boot disk .. but doesn't find /dev/fd0 despite its existence. Also, rootdisk isn't created yet. Getting pretty close.	23 years ago
freesource	2eff37e59b	This makes the default replacement directory permanent, rather than calling it over and over again. Right, now busyboxes ldd is being used in Yard.pm for some experiments.	23 years ago
freesource	a49dcf6c0d	This make sure that path included the Replacements dir .. to be improved more.	23 years ago
freesource	d50e13b210	This provides proper output when the path has been changed, basically, if it is the same thing again, it won't be listed.	23 years ago
freesource	849725cb71	Path is now updated properly, only adding a new path if it doesn't already exist.	23 years ago
freesource	38aaef1e04	This fixes the problem with paths only being allowed to be altered initally, what was happening was that @paths couldn't be changed after they were defined, but not any more.	23 years ago
freesource	780ac8b3d8	This works.	23 years ago
freesource	019afeb942	Can't have anything on the first line here.	23 years ago
freesource	6c6b41a760	# This is the revised link specification which is more # intuitive and allows user-defined links. # The file can be fictional. $abs_file_file means there is # something on the right side. Generally, we want to use # the file on the right as the real file. Simply put, this is a much better approach to handling -> in the template, and it works nicely. It produces warning when the file on the right can't be discerned, but this is o.k..	23 years ago
freesource	80cb0748bb	Added -z to genext2fs.	23 years ago
freesource	5af731e25c	This allows tests to work properly from the Yard Box for non-root users, chrooted tests disappear, it is assumed that most normal administrators would never consider giving non-root users chroot capabilities, but you never know, so only genext2fs is tested for, but room is left if another fs is choosen.	23 years ago
freesource	caca3cae38	This solves a tough to discover bug. When root objcopy the permissions were preserved for libraries, but this wasn't the case for non-root users. The part which did preserve permissions with chmod didn't allow non-root users, but with genext2fs this isn't a problem, though chown is. Anyways, when ld or libc aren't 0755 basically the kernel can't find init. Problem solved.	23 years ago
freesource	3015d7f233	Added -p to objcopy.	23 years ago
freesource	9bc3e644f1	This handles error much better by making $error private, before it was global so it's value remained on error which caused the YardBox to fail to work properly.	23 years ago
freesource	b22b1d9bee	Added -r0 to genext2fs default for non-root user. Now if a genext2fs would work for a non-root user, even though it appears exactly the same as the root_fs created by root with the same template .. it just doesn't work.	23 years ago
freesource	8604aa6dd0	If Replacements are symlinks, the actual file linked to is copied, this helps with the new structure of allowing symlinks in Replacements.	23 years ago
freesource	c25f039c0c	Fixed a mistake, added $rm as found in *-X11 to create escaped ::Id.	23 years ago
freesource	b0a6543983	The latest and greatest uml 2.4.14.	23 years ago
freesource	bfd43e2154	This adds $main::Id and generated by $0, diversions, status and available can't have comments added, but they are in their own dpkg directory anyways.	23 years ago
freesource	157e8de6e4	CVS information is preserved.	23 years ago

1 2 3 4 5 ...

638 Commits (c7f6af4af5e052d7357752d85eb4bdb097c27634) All Branches Search

638 Commits (c7f6af4af5e052d7357752d85eb4bdb097c27634)

All Branches